Intro

If you follow us on Instagram, you may have had a little peek at the Royal Enfield Shotgun 650 already, either at the release event last month, or maybe you saw the stories this weekend. I got to test ride it for the weekend, and what fun I had!

The fourth motorcycle in the line-up on the 650 twin platform sits somewhere between its siblings, literally. The Super Meteor 650, with its more laidback, cruiser riding position, sits on one end of the spectrum. The Continental GT and the Interceptor on the other with a sportier, forward-leaning position. The Shotgun fits right in the middle, with a comfortable, upright riding position, allowing for a 90 degree bend in the knees. 

First Impressions

The engine is what we expect from Royal Enfield, a 648cc twin without annoying vibrations and a meaty midrange. It pulls away nicely, and you would not know that you’re sitting on 240kg of steel with only 47 horsepower. This is due to the evenly spaced gear ratios. The power is always there. Further, due to the 25.3 degrees rake angle and the 18” front wheel, it is easy to tip the bike into corners and with its low centre of gravity, you’ll be scraping pegs before you know it! And if it gets too exciting, the 320mm front and 300mm rear brake with dual piston calipers do their job. They are perfectly adequate for city riding and country lane touring.

Riding Experience

The reliable twin gets up to highway speeds easily, and sits there comfortably. And this without a wind or fly screen! I blame the comfortable riding position. The seat sits at 790mm, and for my tall ostrich legs, I could do with a few more centimeters of padding, especially after a few hours in the saddle. This butt-numbing experience was exacerbated by the rear shocks being set up for an average rider weight. Something I have never reached. The front end is a whole other story, the 5-step adjustable upside down Showa forks handle any unevenness in the road surface well. Trust me, I have put the suspension to the test. Some of the roads in the countryside in Berlin give the impression that they were last maintained when the wall was still up. With all that mixed riding, it still only used 6.6L/100km. And I am sure you can get a lot more out of it when you’re cruising at a leisurely 100-110 km/h. I will not let my sore bottoms affect my judgment of the bike, it is just a head’s up for those that do not fit into the average rider category to consider making some adjustments.

A Platform for Customisation

And that brings me to what this bike really is. A base, a platform, a blank canvas. But a really cool looking one to start with. The Royal Enfield Shotgun 650 comes in Sheet Metal Grey (€7590), Drill Green and Plasma Blue (€7690), or a two-tone Stencil White (€7790). The slogan for this model is “Inspired by custom. For custom.” Royal Enfield really invites and encourages you to give this bike a personal touch. To get started with that, they offer 31 additional parts to mix and match to your liking. I can really recommend the round bar end mirrors. Not only do they complete the look, they function too! Because, looks first, safety second! No wait, safety first! The finish of these mirrors is excellent, and I think they complete the look of the bobber. Further accessories include indicators, seats, crash bars, and even billet aluminium wheel sets (hot!). What is missing in my book: exhaust options! I would love to see how a shorter, sportier exhaust would look! I like the dull sound of the pea shooters, it is decent and pleasant for city riding, and it does generate a nice roar when you open up the throttle. What I would be keen to try is the bolt-on subframe with luggage rack and pillion seat. This innovative design allows you to switch between practical setups without compromising the style in no-time.

Photo: Casper van der Ven

Photo: Casper van der Ven

Nifty gadget

Talking about practicality, Royal Enfield has developed an app that connects to the bike via BlueTooth. You can tuck away your phone, charge it in the onboard USB socket, and it will send directions from the app to the turn-by-turn digital navigation unit. A neat feature, and especially in the city it functions really well! The app is based on Google Maps, and includes the “avoid highways/tolls/ferries”-options. Well done Royal Enfield! 

Photo: Casper van der Ven @Craftwerk Berlin

Photo: Casper van der Ven @Craftwerk Berlin

Conclusion

In all, I had a really great time on the Royal Enfield Shotgun 650. It is surprisingly nimble for a bike in its weight class, the comfortable riding position allows both for relaxed cruising/touring and more active riding, and the engine is smooth. An excellent bike for people looking to get (back) on a bike, for people who want to express themselves and their creativity without having to learn how to weld or fabricate parts, and for people who just want a reliable, comfortable, and fun ride without breaking the bank! 

 

In the early glow of a summer morning in mid June, 12 people met at a filling station in Berlin. After filling our tanks and our bellies, we set out towards Kassel, final destination: the 12th edition of Wheels & Waves in Biarritz, France. The crew astride their iron steeds, including three Ducati’s, BMW’s, Triumphs, Honda’s, Royal Enfield, Moto Guzzi, and two sponsored Moto Morini’s (read our first ride review of the Seiemmezzo SCR).

Photo: Cäthe Pfläging

The unifying factor for this random collection of bikes: Craftwerk Berlin. Craftwerk is a community garage where members can store their motorcycles, do regular (supervised) maintenance, build their custom bikes, and enjoy a range of motorcycle related events, including ride-outs, workshops, and motoGP and documentary screenings. It includes an event space that can be rented and doubles as a museum, as well as a cafe that is also open to the public. If you find yourself in Berlin, this place comes highly recommended. One of the founders and one member put their heads together and planned this trip to Biarritz and dubbed it “Transpirenaica”. Why? Because we would make tracks across the southern, Spanish Pyrenees from the Mediterranean coast to the Atlantic coast and back along the northern, French side. 

Photo: Janna Strauss

The first leg, Berlin-Kassel, was uneventful, except for a rogue exhaust baffle that was McGyvered back into the exhaust with a paperclip. The route took us via the Bauhaus Museum in Dessau for a cultural coffee stop and through the Harz Mountains National Park to balance out the Autobahn kilometers. In Kassel, Rudi and his bus were waiting for us. A strategically timed bus to expedite the transport of the 12 and their motorcycles to Perpignan. Two more people arrived by train, they would be driving the support vehicle. While loading the motorcycles, the group enjoyed a lavish filling station dinner on the pavement, before the 14 embarked on the bus and tried to get some shuteye. 18h later, we disembarked in the south of France and gave our bikes and luggage a once-over. One of the oldies required its tappet clearances proofed and head studs retorqued, making it the second “repair” within 500km. Here, another Triumph plus rider from Vienna joined us.

From Perpignan we set out via the country roads into the hills to have lunch at le Donjon de Pyrepertuse in Duilhac-sous-Peyrepertuse. After refueling the humans, the curvy roads of the Pyrenees took us through de Gorges de Galamus, with its steep cliffs cut by the rivers deep down below and a road hacked into the canyon walls with dramatic overhangs, riding this narrow road send the heart racing while dropping your jaw in awe. The contrast when going over Col d’Ares, across the border into Spain, was stark. Whereas the canyon is enclosed and narrow, the views from the mountains are wide and far. We overnighted at the campsite Vall de Camprodon. Here, we were united with an additional 3 riders who made their own way south with the support van, loaded with a Yamaha, Rieju, and a BMW. Having a support van would soon prove to be the smartest decision of the entire trip. Earlier, we got separated from the Guzzi that had ignition issues, but made its way to the campsite with a hand drawn paper map. It sure helps when you speak Spanish fluently. 

Photo: Cäthe Pfläging

The next morning we left for Montardit de Baix, via Castellar de n’Hug and Cadí-Moixeró Natural Park. We had divided the group into two smaller groups based on riding skills, which eased the riding, yet complicated the logistics. Windy roads, up and down mountains were a welcome change from the straight roads we usually ride around Berlin.

Photo: Cäthe Pfläging

Next morning, after a breakfast of toasted sandwiches, croissants, coffees, and orange juice, we set out for some more mountain passes. Unfortunately, the Moto Guzzi stayed behind, again. Though this time something had gone missing… the ignition key. Searching every pocket, trousers and jacket, twice, and after unloading and repacking the van, twice, and searching through all the camping gear, the decision was made to load the Guzzi into the van and catch up with the rest of the group. Meanwhile, atop a mountain, one of the other riders was rather surprised to find an unfamiliar key in a jacket pocket… Black leather jacket surely do look alike when the sun has gone down.

The third night we stayed in Boltaña. We caught a little bit of rain that day, and we moped about Spanish summer weather. Little did we know what tomorrow would have in store for us. 

After a peaceful sleep, the skies had cleared up a bit, and we happily got on our bikes for more windy roads. We tracked through beautiful gorges and over mountain passes with stunning views. The weather, however, was not on our side that day. We barely saw the sun, and the clouds grew a deeper grey. The groups got further split up, and I was in a group of four tracking north through the valleys towards camping Asolaze in Isaba. As the rain got more intense, we missed a turnoff and rode all the way to the end of the valley in what had become a torrential downpour. On the side of the pavement, small rivers of murky yellowish brown water had started to flow. More than once we saw the front wheel dip into a puddle up to the axle. At the end of the road we spotted an inn, we made it!
Except, the inn was not Asolaze, it was the Linza Inn, one valley east of where we needed to be, separated by a 1500m tall mountain. So we had to track back half an hour, ride over the mountain pass, and north again in the next valley. The 20km that normally takes less than half an hour, now took 45 min. The rain persisted and the insoles of my boots were drenched, water had gotten in everywhere. Rain gear is only water proof until it is not. Luckily we all made it to Asolaze without any incidents or accidents, and warm tapas awaited us. Another sponsored bike, a BMW R18 ridden by the mind behind North of Berlin motorcycle gear, joined us here. 

No rides were planned for the next day, so everybody was free to decide whether they would ride somewhere, or relax and dry their clothes. A few made tracks into the mountains to the Canfranc hotel in the Aragon valley. The former train station, built in 1928 on the border of France and Spain, stood abandoned from 1970 until in early 2023, when it welcomed its first guests as a hotel. A great stop for photos or a coffee.
Half of the group tracked back to the gorge south of Ansó to shoot photo and video for the various motorcycle, gear, and helmet sponsors. Shooting video while riding the two Moto Morini and the two BMWs was fun! Contrary to the day before, it was a right scorcher! Over 30 degrees Celsius is comfortable at the beach or manageable while riding, but standing in the bright sun in a full North of Berlin suit or Rusty Stitches denim and leather gear is another story.

At the end of the day, everybody rode to the top of the pass for a sunset and picnic dinner. The road conditions were excellent, the curves exciting, yet fog obscured the view and dinner was postponed. The last rider joined the group here, atop a stunning Ducati 999S, now totalling 18 people.

Photo: Cäthe Pfläging

Photo: Casper van der Ven

The next morning we set out for our destination: Biarritz! Due to the recurring ignition difficulties with the Guzzi, and a worn rear tyre on a Ducati, a small subgroup set out to San Sebastián to find a motorcycle shop. While the shop changed the tyre, the boys got their tools out and had a go at adjusting the Guzzi’s points and timing. They were rewarded with a sunset on the beach, a couple of beers, and the local specialty plates of food to share, pintxos, or Basque tapas. Think deep fried potatoes (Krokettas), battered meatballs (Bolas de Carne), and omelets (pintxos de tortilla). Ádamo is famous for theirs. Since it was the night before the summer solstice, or San Juan Eguna, local artists performed on a stage on the Padre Claret square next to Zurriola beach and the entire town danced the traditional folk dances into the night around a huge fire. The atmosphere was simultaneously ecstatic and relaxed, without having that all too familiar tacky tourist vibe. The Guzzi remained in San Sebastián. This time not due to technical difficulties, but because the rider gifted this motorcycle to his father, who resides here and has been considering getting back in the saddle. What a wonderful gesture!

Our base in Biarritz was at Camping Erreka, a central point to enjoy the festivities around Wheels & Waves. We went to the flat track races in San Sebastián, the concerts and vendor show at the Cité de l’Océan in Biarritz, and spent a day on the beach to rest our bodies after a week of riding all day, every day. Unfortunately, the swell was taking a rest too, and surfing was out of the question. We made up for it by cutting ourselves a large slice of Gâteau Basque, a buttery, crumby textured, tender cake, the local specialty. 

Photo: Janna Strauss

Photo: Cäthe Pfläging

After two nights at the festival, enjoying the concerts, the motorcycles on display, the shows, the vendor stalls, and meeting like minded people, we set out back towards Berlin. Via various mountain passes, including Col de Cloze and Col du Tourmalet, we made our way to Camping d’Esplantats in Sarrancolin. Riding in this part of France provides routes to everyone’s liking. What a wonderful part of the world! The local bakery provided us with croissants, coffee, and even flan, the caramel pudding, before setting out the next morning. Parts of the group had split off to make their own tracks back, due to different schedules and obligations. 

Photo: Cäthe Pfläging

After a long day in the saddle, over hills and through beautiful forests, we arrived at Camping Domain LaCanal, run by a Dutch couple. Though they weren’t quite open for the season, they put us up for the night and even cooked up an enormous breakfast the next morning. A lovely campsite on a hillside, with a fantastic view down the valley. Unfortunately, I had to retire the R80 and send it home with the van due to a blown seal and insufficient time to obtain parts, repair it, and make it to Italy in time for a wedding. Similarly, the Ducati 999 had to retire as well. It had tried spreading its wings the previous day, when someone took it for a top speed test on the local highway. It overtook me with a roar unique to a desmodromic twin with an open exhaust system. Shortly after I spotted a bright red panel on the asphalt, as well as two black tyre tracks, waving and crossing each other from the left lane, into the middle lane, across the right lane, and I feared to see motorcycle and rider separated on the side of the road. Due to skill and a huge dose of luck, both rider and bike were standing upright at the next exit, though the Ducati looked a little naked. The Italian Stallion had actually succeeded in shedding its wings. The wind had caught underneath the fairing and ripped both left and right panels off, almost throwing the rider off in the process. Shaken and flabbergasted, we all took a minute to count our blessings.

Photo: Casper van der Ven

The blown seal ended the trip a little early for yours truly, but thanks to the French and Italian public transport system, I actually made it to the wedding in Italy three days later. The rest of the crew tracked back to Berlin via the French and Swiss Alps. Keen to see more? Check out this video on Nils Homann’s channel (photo & video credit: Cäthe Pfläging, Patricia Strauss, Felix Schmidt)

Photo: Cäthe Pfläging
Photo: Cäthe Pfläging

Flat Track racing may not be that well-known here in Europe, but it is certainly one of the most fun, and – importantly – most accessible forms of motorcycle racing out there. So, when Royal Enfield invited me to try it out, I was quick to accept and showed up for my day of training at the Flat Track in Noordeloos (South Holland).

Royal Enfield already has started these so-called Slide Schools in India, Thailand, the USA, the UK, and Italy. Now Royal Enfield Europe is also launching this in the Benelux, under the name of “Flat Track Academy powered by Royal Enfield”

What these Slide Schools have in common is that the riding is done on flat-track prepared Royal Enfield Himalayan 411cc motorcycles… What does that mean? Well, these bikes are stripped down versions of stock motorcycles – no mudguards for instance, but what jumps out immediately is that there is no front brake!

The other thing with flat track riding that really pulls you out of your comfort zone – as a more or less experienced motorcyclist – is the steel shoe you get to put on your left foot. Put on your gear, strap on the steel shoe and on to the track! An oval track, dirt or gravel with short straights and a 180-degree left hand corner at both ends, it’s that simple.

But that does not mean Flat Track is easy though! You have to forget a lot of stuff – like having a front brake… There is none so the only way to slow down is the engine and the rear brake.  And then putting your left leg out to slide on the metal also takes some time to get used to! The idea is to hit top speeds on the straight of the oval before leaning over, sticking your left leg out and sliding into the corner to make the 180-degree turn, and then race back down the other straightaway. That slide into the corner is really what makes Flat Track very different from any other kind of racing I have done….

Maikel Dijkstra, our fully licensed motorsport trainer and international Flat Track racer, started us out with trying to make really small ovals, to get a feel for sliding with your left foot out, as your main cornering technique. Then on to practice runs on the whole track with some cones laid out to get to the optimal lines. Maikel showed us the basic techniques that will allow you to get around the track, but there are more – harder – ways to round that oval track much faster… Flat Track as it turns out is a sport that is easy to ride, but hard to master!

Anyway, by the end of just a couple of hours we got to do some real laps, even a quick race or two, and that really was a whole lot of fun!

Flat Track racing is one of the fastest growing motorsports, and Royal Enfield and the Flat Track Academy are obviously keen to have many more folks getting into it… To celebrate the launch of the Flat Track Slide School in the Benelux, they are giving our readers a chance to win one of these courses!

So, do you want to win a Slide School course, worth €190,-, given by the Flat Track Academy powered by Royal EnfieldBenelux?

The Flat Track Academy organizes these 3-to-4-hour courses at tracks in Vledderveen or Roden in the Netherlands. All you have to do is send me a note (jaco@bikebrewers.com)  telling me why you would like to win this Flat Track course… Please send in your entry by July 22 to be eligible to win! Keep in mind that the winner must be 15 or older, and you will have to bring your own motorcycle-riding gear (helmet, gloves, protective jacket/trousers and shoes over the ankle) to the course, date and place to be arranged with Maikel.

Disclaimer: By participating in this promotion, you give MotoMondo (Royal Enfield’s distributor on the Benelux) permission to use your personal data. MotoMondo processes your personal data for marketing purposes and will treat your personal data confidentially.

The motorcycle industry, at least on the combustion engine side, has not seen a lot of new brands come to life the past few decades. Yes, we did witness the successful resurrection of famous brands from the past, like Indian and Royal Enfield, who are developing and pushing out impressive ranges of truly great motorcycles. But we haven’t seen many new brands of combustion engine motorcycles lately.

However, the birth and subsequent rise of electric motorcycles has resulted in a whole slew of new manufacturers. Zero was an early starter in 2006, and especially in the last few years quite a few new entrants, like Energica and Cake, have emerged.

But for the motorbike enthusiast with a fondness of classic styling – like myself, I have to admit – many of these motorbikes just don’t look right… Mainly due to the necessity of big battery racks I guess, but it seems quite a few new builds either go for sportsbike-like fairings which hide these batteries (like Energica), or for quite radical new styling accentuating the difference with combustion engine bikes (Cake or Sondors). And the ones who take their styling cues more from ‘regular’  motorcycles, look, at least in this author’s admittedly biased opinion, clunky at best…

There are exceptions of course, like RGNT Motorcycles from Sweden, and now there is a promising new brand out of Brazil just starting up, called RTR Electric motorcycles!

Because what better base for a real commitment to classic lines than founders who share a 30-year history of designing and building award-winning custom motorcycles under the label ‘Retrorides By Lourenço’. You may know them from their book “The CafeRacer Bible”, a great “How to build” resource, and from their sublime proprietary suspension for the BMW K100…

So now, following their desire to play their part in creating a cleaner and smarter future for humanity, they founded RTR Electric motorcycles.

Their first model, the 799e, is an electric scrambler targeted at urban use. Its design is inspired by the iconic Scramblers of the 1970s – and it looks the part!

Pre-production exemplars are undergoing the homologation process in Brazil now, production of the RTR 799e is scheduled to start December 2023. They plan to start selling these bikes in Brazil, the United States and in Europe to begin with.

RTR are determined to preserve their custom DNA, their reputation for delivering great motorcycles, and their spirit of “handcrafted by hand”. 

They aim to accomplish this by offering full customization options on the website as part of the purchase process, by using the best high-quality parts and by completely hand-assembling the RTR 799e in Brazil…

On the website, customers will for instance be able to choose the colors, the type of seat, the type of tires, the type of front fenders, the type of headlight, to use side plates or not – making each motorcycle unique. 

High quality also means that these motorcycles are built with noble materials that do not harm the environment, and are built to last while also designed to be upgradable.  A really neat detail is that where gas would be stored before, the 799e has a 7-liter glove compartment to store your stuff!

While the 799e’s range is not stellar today at 120 km with a full battery, RTR are partnering with major battery developers to significantly increase this autonomy. You can charge it by just plugging into a regular 110/220V outlet.

Top speed of 127km/h is certainly acceptable for its intended mostly urban use. And the ‘kick’, as with all electric motorcycles, is the instantaneous torque thanks to the electric motor delivering “everything” at once, which propels you like a bat out of hell as soon as you twist the throttle!

So all in all RTR are well underway on this exciting journey. Driven by passion as they are, they still want to achieve their goals faster and more efficiently, so they are currently selecting investors to help them. But help them in a way that allows them to stay true to their starting points: Really change the way people get around, by providing a cleaner and more sustainable electric alternative, but also to construct these beautiful motorcycles in their native country of Brazil! 

www.rtrmotorcycles.com

Back home in Amsterdam, we just had the first ride of the year cut short due to rain, really cold rain that is…

So, when I got invited to test the new Royal Enfield (RE) Super Meteor in the South of France, ‘yes please’ was the only possible answer!

Our hosts Motomondo and Sima had prepared a bunch of brand-new bikes for us to ride in Marseille, most of them with 10km or less on the clocks. So careful with the tyres on the first kilometers! Especially as we had some rain in the early morning, fortunately the only rain we’ve seen that day….

The RE Super Meteor is a retro cruiser – with all the cruiser characteristics you might expect – low seat, hourglass shape seen from above, large tank, forward controls, high and wide handlebars. You sit upright with your arms and legs stretched forward. Not really familiar for a sportsbike rider like myself, but I have to admit, it’s comfortable and allows you to keep riding all day long!

The 648cc engine – the same basically as the engine on the Interceptor INT 650 or the Continental GT 650 bikes – is a 4 stroke, Air-Oil Cooled Parallel twin. A so-called ‘mid-segment’ bike, not as big – or intimidating if you prefer :-) –  as your typical Harley or Indian cruiser. But plenty of ‘oomph’: 47 horsepower, accelerates quite quickly, lots of torque with 80% of the power delivered below 3.000rpm, and a very steady and comfortable ride at highway speeds.

As mentioned above, I’m a sportsbike rider, so especially cornering had a bit of a learning curve for me. Having the peg feelers scrape the asphalt in nearly every turn – most of them are 180 degrees on the fabulous ‘Route des Crêtes’ – was a bit scary at first. But you learn to lean less and not to worry too much about the scraping.

And then you’re set – this is a bike that is very easy to ride. Smooth throttle, effortless shifting, good acceleration, more than adequate braking by the single disc brakes front and back. There even is ABS on board. Plus USD forks with a 120mm stroke, an RE first. The bike has a low center of gravity, feels quite stable on the straights and is easy to steer into the corners. This can be attributed to the 16” rear wheel and the 19” front wheel in true cruiser style, but, according to RE, is certainly also courtesy of the new frame and swingarm which have been developed in conjunction with Harris Performance in the UK.

When you first sit on the Super Meteor, it feels higher than you’d expect standing next to it. But that height works – for me, I’m of average height at 1m75, but also for the more ‘vertically challenged’ colleagues on the ride, and even for those exceptionally tall Dutch guys that were riding with us.

Moving to the looks then: the Super Meteor is unmistakably a cruiser with its narrow waist and big teardrop-shaped tank. It also reflects the RE heritage quite well, for example by its chrome tank badges with historic RE logo.

The Super Meteor 650 is available in five colors: black, blue, dark green, grey and dark red. There is a minor price difference between the single color painted ‘Astral’ models and the two-tone ‘Interstellar’ models.

However, what really struck me is that for €300 more, you get the Super Meteor 650 Tourer, which comes with a nice luxury one-piece touring seat with embroidered logo, windscreen, and a pillion backrest. That seat does not only look great, but is a bit softer and more comfortable as well. So even if you’re not into backrests or windscreens, I would still go for the Tourer model and just store the windscreen and backrest.

All in all, the RE Super Meteor was a blast to ride on the curvy roads of the Route des Crêtes. The only minor setback were the tyres, which were no match for the brakes and lacked some grip at an angle. So I would shell out for a pair of more grippy touring tyres pretty quickly I guess.

The RE Super Meteor is a very reasonably priced mid-segment bike with an engine that has proven its worth, and featuring high-end components such as ABS, upside-down front suspension, and LED lighting. Plus TBT (Turn By Turn) navigation, linking to your smartphone. We did not get to test this however, as we were just trying to keep up with Joel, RE’s Marseille dealer, who clearly knows these roads very well…

So who’s this bike for? Well, obviously you have to dig the cruiser style, but RE had some specific target groups in mind when they built this bike:

• female riders, looking for a classic style and easy-to-ride bike
• returning riders, looking for a classic-looking, dependable weekend toy
• Royal Enfield afficionados who want an upgrade or more modern bike
• first time buyers looking for a lot of value for money, a brand with history and an un-intimidating riding experience…

Prices vary in Europe due to different taxes for new motorbikes (still…), but range from €7.200 for the single-color Astral model, €7.400 for the two-tone Interstellar and €7.700 for the Tourer in Italy, to €9.499 for the Astral, €9.799 for the Interstellar and €9.999 for the Tourer in the Netherlands.

So go and try one out at your local RE dealer if you’re interested…

Mooyong Zeus is the founder, owner, designer, builder and all-round nice guy of Zeus Customs in Bangkok, Thailand. I last met Mooyong during my visit before Covid – so I was mighty curious how he is doing now that the pandemic-storm has subsided a bit.

Mooyong started Zeus Customs in 2014, when he decided his love for motorcycles – and customizing them – was more important to him than his secure income as a software developer… He started out customizing 150cc Stallion bikes, lightweight Chinese bikes which are very popular in Thailand, these are basically the same bikes as those sold under the brand name Mash in Europe. His first workshop was just a room in an apartment building, but he had to look for another place pretty soon as the neighbors complained to the landlord about the noise… That happened again with his next location, so then he moved to a large more industrial building on the outskirts of Bangkok. That’s where I met Mooyong three years ago. Covid was a difficult time for Zeus of course, but he survived! After Covid, he moved to a slightly smaller but more central place in a nice neighborhood of Bangkok, where he now has a much more intimate and really pleasant place with a great showroom, plenty of bikes on display and couches to hang out on, as well as a fabulous yard with more bikes and tables to enjoy your coffee or a drink…

Given his software developer background, no surprise that Mooyong is an avid and expert user of social media. His Instagram posts went viral in Thailand and before long he got requests to customize bigger bikes. After he did a first brat-style conversion based on a Ducati scrambler for a lady which got a lot of attention on Instagram, demand skyrocketed. Still, cutting up a big expensive bike for the first time was a big step, so Mooyong bought a Triumph to work on for himself first. But he only cut into the frame after a strong push from his girlfriend!

So now Mooyong does a max of 30 full customizations per year, not more to maintain quality, together with his 2 mechanics – which he kept on staff during all the difficult Covid period.

Zeus customizes mainly for Thai customers and long-term expats. His Thai customers tend to ask for full customization of for instance café racers, and then use the bikes mainly for special events and to decorate their homes. The expats usually do use their bikes on a daily basis, their modifications range from again full café racers to scramblers – depending on their need for comfort on the road… Zeus also do more light conversions for both groups, such as just handlebars and seats.
While Mooyong is very interested in exporting his customs, a lot of times the regulations of his customers’ countries get in the way. But while an export to Germany serves as a decoration piece because the owner cannot get it legalized, another bike is out on the streets of Moscow, Russia – as the rules seem less strict over there. He does have a partner in Japan now specifically for fully customized Honda Monkeys, which are wildly popular over there.

Right now, Zeus is converting 8 Royal Enfield Himalayans to competition-ready flat-track bikes, commissioned by the factory who want to open a flat-track school in Thailand! He is also working with Suzuki Thailand on a full café racer custom to inspire more customers to buy that particular model, and they then plan to auction it off…

Zeus’ main exports to Europe today are his homemade leather side-bags and tank straps. Custom parts are a little harder as specifications can differ even for the same model bikes.
He also sells quite a bit of merchandise to tourists who visit the shop to get some new ideas or just hang out. T-shirts, caps, mugs, bag-tags, you name it… These are all his own designs – great stuff if you ask me!