You searched for stitches - BikeBrewers.com https://bikebrewers.com/ Europe largest directory Cafe Racers, Scramblers, Bratstyles & other Custom Bikes. Tue, 20 Feb 2024 19:53:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.3 Gear Review: Rusty Stitches https://bikebrewers.com/gear-review-rusty-stitches/ https://bikebrewers.com/gear-review-rusty-stitches/#respond Sun, 11 Feb 2024 15:14:37 +0000 https://bikebrewers.com/?p=4035 It was a first for the BikeBrewers team. As a concerted effort four members tested a great variety of Rusty Stitches gear and gave our honest and unadulterated opinion. Pictures paint a 1000 words and video does the rest. We decided to go Full Monty on this one with ‘both unboxing and review videos. Don’t watch those, we're awful at video's!

The post Gear Review: Rusty Stitches appeared first on BikeBrewers.com.

]]>

Intro

It was a first for the BikeBrewers team. As a concerted effort four members tested a great variety of Rusty Stitches gear.

The manufacturer was keen to have riders test their apparel in all kinds of circumstances and asked us to give our honest and unadulterated opinion.  They shipped us a broad selection of their gear and we had some fun with it all over Europe and the Middle East. 

Pictures paint 1000 words and video does the rest. We decided to go Full Monty on this one with ‘both unboxing (Ron&Yvanka, Casper) and review videos (Ron: Jari V2 & Neill, Adnane: Cooper & Carl Thomas, Yvanka & Ron: Cliff, Joyce V2 & Claudia, Casper: Jari V2, Zack, Paolo). Don’t forget to check them out. We hope you will enjoy watching them as much as we had fun producing them.

International!

Yvanka took the Joyce jacket, Gloria V2 trousers, and Kathy gloves all the way to a Kawasaki press event in Italy. After some rides in his home country the Netherlands, Adnane shipped the Dorian and Cooper jackets, and the Johnny gloves to Dubai where he is currently residing. 

Casper had scheduled a roadtrip from his home in Berlin all the way via Italy to Wheels and Waves in Biarritz, donning the Jari V2 jacket, the Zack gloves, and the Paolo shoes. Ron decided to take the Cliff suit to go storm chasing, ending up in torrential rains in Belgium and France. Fortunately he managed to find some sunny weather to enjoy the Jari V2 caferacer jacket later. 

The Joyce V2 Women’s Jacket Review (Yvanka)

The jacket has a very flattering, lightly tailored fit. It has some very feminine yet tough looking stitching on the back. I received the black version with the pink patches on the shoulders and the yellow and blue stripes on the upper arm. In all honesty, I would never have picked that colour myself. 

So it was quite a surprise when I opened the box (check our unboxing video). But it grew on me, the more I wore it. It has a girly ring to it. But that does not have to be a bad thing, of course. And it actually matched quite nicely with the titanium coloured Indian Chief Bobber I rode at that time. I also took the jacket with me on a trip to Italy, where I got invited by Kawasaki Italia to ride their complete motorcycle line-up. We rode for hours. And while you would think of sunshine and warmth, when you think of Italy, well… we were not that lucky. It rained, almost the entire time. Mostly drizzling rain, mixed with some heavier downpours every now and then.

And that might have been the biggest surprise about this whole Rusty Stitches outfit: it actually kept me dry! This is something I really did not expect. I guess the wind while riding was enough to keep it sufficiently dry to not leak through. And I did not get cold either. So, that was a huge plus for the Joyce V2 jacket.

Pros: Styling, fit, surprisingly weather proof
Cons:

(Photo by Patricia Sevilla Ciordia,  http://pscfoto.net)

Jari V2 Men’s Jacket Review (Casper & Ron)

I (Casper) got ‘lucky’ enough to test the Jari V2 in all types of weather, heat, cold, sun and show. By now I have worn the jacket for over 5000 km, between 2C and 35C, and from sunshine to torrential downpours. The leather is soft and supple, and the fit is excellent (185cm, 70kg, size Medium). The jacket offers sufficient mobility on the bike and simultaneously creates a feeling of safety in case you inadvertently find yourself coming off the bike. It comes with elbow and shoulder protection and of course there is the internal pocket for a back protector. 

It is big enough to fit even the thicker Forcefield armour. The ventilation on the chest and back are functional without compromising the styling. Similar to any unperforated leather jacket, avoid traffic jams in the peak of summer. 

(Photo by Cäthe Pfläging)

When you find yourself in fresher weather or out late, pull the liner out of your bag! It packs small for easy stowage and zips in easily. And if you catch an unexpected rain shower, this jacket will hold up for a bit. In all, it is a true three season jacket! 


(Photo by Vincent Burger)

What can I (Ron) add to my fellow BikeBrewer? Having led a motorcycle life for many decades I have been able to try out many different jackets in all sorts of styles, materials, fits etc. Rusty Stitches would not have been my first ‘go to’ brand for a street cred cafe racer jacket, until I received it and put it to the test.

Yes, it has everything Casper has claimed above, but also, the reactions I got from fellow riders while wearing it, gave me the confidence to state that Rusty Stitches have done a pretty good job.

Pros: Styling, fit, CE level 2 protection, three seasons.

Cons: Limited ventilation in the peak of summer.

Rusty Stitches Dorian Men’s Jacket Review (Adnane)

The Dorian jacket from Rusty Stitches is a blend of vintage style and modern functionality. The matte finish exudes a high-end feel, appealing to classic bikers with a contemporary fit. The 100% soft cow leather construction provides a luxurious touch, while the satin lining makes it exceptionally comfortable. 

The CE-approved elbow and shoulder protectors, coupled with the universal back protector pocket, prioritize safety without compromising comfort. The adjustable features at the hips and wrists, along with the modern fit, enhance the overall riding experience. The jacket’s four pockets, both inside and outside, offer practical storage. The Snap Claws add a nice touch to the design.

Pros: Stylish matte finish, high-quality leather, comfortable satin lining, CE level 2 protection, adjustable fit.
Cons: Limited ventilation for warmer days.


(Photo by Vincent Burger)

Singing in the Rain in the Cliff suit (Ron)

It was an early summer morning. Very early actually.
I had to be way down in Belgium at 8AM that morning. A three-hour ride for which I had to be on the road way before commuters were having their breakfast cereals. 

With over 40K+ motorcycle kilometres annually I am used to all kinds of weather and the forecasted rain looked perfect to test the Cliff pants and jacket. After all it is advertised as “The ultimate adventure jacket for a fair price.”

Humming the Cliff Richard song ‘Summer Rain’ I set out for my trip. After an hour the rain set in and it ended in a nightmare of torrential rain for the remainder of the trip. Water splashing down from the black clouds and washed left and right from spray coming from trucks ahead and while passing them.

The suit was brave and the membranes managed to keep me quite dry for an hour and a half. After that it just gave up and let it go. Honestly, there was no other way. Even suits twice the price will give you a similar experience. 

So kudos to Rusty Stitches for being able to give more expensive brands a run for their money. It is a very good package for the price you pay.


(Photo by Vincent Burger)

Pros: Definitely water proof for ‘normal’ rainy circumstances. Very good membrane and both the jacket and pants have easily removable layers for warm weather. Good ventilation options

Cons: The waterproof membrane did not have elasticity at the wrists. Taking the jacket off resulted in tearing off the little loops with clips on the inside of the jacket sleeves to keep them in place. Those loops could also be a bit sturdier by the way.


(Photo by Vincent Burger)

Rusty Stitches Cooper Men’s Jacket Review (Adnane)

The Cooper jacket seamlessly combines retro aesthetics with contemporary safety features. Crafted from 100% Buffalo leather, it exudes a nostalgic charm. The removable thermal-padded polyester lining ensures versatility in varying weather conditions. CE Level 2 protectors for elbows and shoulders provide robust safety, and the option to upgrade with a D30 back protector enhances the jacket’s protective capabilities. The adjustable features at the waist and wrists contribute to a customized fit, while the seven pockets offer ample storage space, including a dedicated phone pocket.

Pros: Retro look, CE level 2 protection, versatile thermal liner, upgradeable back protector, adjustable fit.

Cons: Limited breathability in warmer weather.

Rusty Stitches Ruben Review (Casper)

This mesh jacket is an absolute dream and comes highly recommended when the quicksilver passes 25C! The ventilation is excellent, as expected, and the fit is adjustable at the hips and wrists due to the velcro straps. The upperarm width is adjustable with two press studs, the underarm width unfortunately is not. This results in a shift of the position of the elbow protectors.

Rusty Stitches Claudia Trousers Review (Yvanka)

The fit of the Claudia V2 pants is a bit difficult for me. I have a small waist, but slightly stronger legs. So they are a bit tight around my thighs, but fit really well around my waist. They look good and accentuate your female curves. Which is always nice. 

We female riders may actually look like women on the bike, every now and then. Oh, and these pants are quite warm. A bit too warm maybe, for 30+ degrees ride outs in summertime. But very pleasant during normal European temperatures. 

The only ‘bad’ thing I have to say about the whole outfit, is that the stitches of the Claudia V2 pants are a bit, well… ‘Rusty’? Maybe it is because the pants are a bit tight around my thighs. But the seams opened up, and the stitches broke. It is not that I have to squeeze myself in them, they are not that tight. Just slightly, which should not have been enough to wreck the stitches. This is really the only thing I can think of, in terms of future improvements. 

Rusty Stitches Kathy Gloves Review (Yvanka)

My first impression: the material feels really, really good. The leather is of very high quality and even the gloves feel luxurious when you put them on (we think they are VERY sexy – other team members-). 

The design of the Kathy gloves has a ‘less is more’ look to it, and it definitely is more. They literally fit like a glove, which can be really hard with a pair of motorcycle gloves. They also look tough and feminine while wearing them. I am extremely picky when it comes to gloves. They play such a big role in the connection with the handlebars and therefore your motorcycle. Luckily, Kathy gloves and I were a match straight away.

Rusty Stitches Johnny Gloves Review (Adnane)

The Johnny motorcycle gloves exemplify Rusty Stitches’ commitment to style and comfort. Made from soft leather, they are ideal for riders seeking a retro or classic look. The Velcro closure ensures a snug fit, and the leather double-layered palm adds durability. The stretch at the wrist enhances comfort during rides, making them suitable for summer. The outer seams provide extra comfort, and the unique colours add a touch of individuality to the overall outfit.

Pros: Stylish retro design, comfortable fit, adjustable wrist closure, durable double-layered palm.

Cons: Limited insulation for colder weather. Not water-proof


(Photo by Cäthe Pfläging)

Rusty Stitches Zack Gloves Review (Casper)

Comfortable straight out of the packaging! They look cool, tough, and classic, and the leather is supple. Plus, the fit is excellent. There is minimal room for improvement, from great to perfect, perhaps? 

In terms of ventilation, I think that the perforations could be relocated to the sides of the fingers, rather than on the top and bottom. When you are gripping the handlebars, the air does flow in, but it cannot flow out, whereas perforations in between the fingers could improve airflow. In addition, the seams at the thumbs are exactly at the point of contact with the handlebars, which was a bit uncomfortable on the longer riding days. In short, excellent price quality ratio!

Pros: Design, fit, comfort
Cons: Stitching and limited ventilation


(Photo by Cäthe Pfläging)

Rusty Stitches Paolo Shoes Review (Casper)

Capable riding shoes that look good! Nice suede that does not require a break in period. I got the lighter coloured variant, which was rather quickly marked with the characteristic gear lever grease stain on the left shoe. They are rather thick, which makes them pretty warm in summer, great in spring and autumn, and hopefully rather safe in the event of a slide. Lastly, they are comfortable on and off the bike! 

Overall conclusion

Rusty Stitches impresses with their jackets and gloves. The blend of style and safety, along with the thoughtful features like adjustable fits and quality materials, sets these items apart. Despite the daily 130km commute, the extended tours, and the abuse of rainy weather, the gear exhibits durability and reliability. 

What is truly commendable is the affordable price point, making Rusty Stitches a standout choice for riders who prioritise both quality and budget. Whether you are partial to the vintage-inspired jackets or the classic gloves, Rusty Stitches delivers on style, safety, and value for money.

They are still a young brand, and we have been testing their gear since the beginning. We believe they are headed in the right direction. Keep an eye out for them if you want to look stylish for a comfortable price. 

The post Gear Review: Rusty Stitches appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/gear-review-rusty-stitches/feed/ 0
Transpirenaica Chronicles: Riding the Pyrenees – A Symphony of Iron, Rain, and Resilience https://bikebrewers.com/transpirenaica-chronicles/ https://bikebrewers.com/transpirenaica-chronicles/#respond Fri, 12 Jan 2024 17:51:42 +0000 https://bikebrewers.com/?p=3943 In the early glow of a summer morning in mid June, 12 people met at a filling station in Berlin. After filling our tanks and our bellies, we set out towards Kassel, final destination: the 12th edition of Wheels & Waves in Biarritz, France. The crew astride their iron steeds, including three Ducati’s, BMW’s, [...]

The post Transpirenaica Chronicles: Riding the Pyrenees – A Symphony of Iron, Rain, and Resilience appeared first on BikeBrewers.com.

]]>

In the early glow of a summer morning in mid June, 12 people met at a filling station in Berlin. After filling our tanks and our bellies, we set out towards Kassel, final destination: the 12th edition of Wheels & Waves in Biarritz, France. The crew astride their iron steeds, including three Ducati’s, BMW’s, Triumphs, Honda’s, Royal Enfield, Moto Guzzi, and two sponsored Moto Morini’s (read our first ride review of the Seiemmezzo SCR).

Photo: Cäthe Pfläging

The unifying factor for this random collection of bikes: Craftwerk Berlin. Craftwerk is a community garage where members can store their motorcycles, do regular (supervised) maintenance, build their custom bikes, and enjoy a range of motorcycle related events, including ride-outs, workshops, and motoGP and documentary screenings. It includes an event space that can be rented and doubles as a museum, as well as a cafe that is also open to the public. If you find yourself in Berlin, this place comes highly recommended. One of the founders and one member put their heads together and planned this trip to Biarritz and dubbed it “Transpirenaica”. Why? Because we would make tracks across the southern, Spanish Pyrenees from the Mediterranean coast to the Atlantic coast and back along the northern, French side. 

Photo: Janna Strauss

The first leg, Berlin-Kassel, was uneventful, except for a rogue exhaust baffle that was McGyvered back into the exhaust with a paperclip. The route took us via the Bauhaus Museum in Dessau for a cultural coffee stop and through the Harz Mountains National Park to balance out the Autobahn kilometers. In Kassel, Rudi and his bus were waiting for us. A strategically timed bus to expedite the transport of the 12 and their motorcycles to Perpignan. Two more people arrived by train, they would be driving the support vehicle. While loading the motorcycles, the group enjoyed a lavish filling station dinner on the pavement, before the 14 embarked on the bus and tried to get some shuteye. 18h later, we disembarked in the south of France and gave our bikes and luggage a once-over. One of the oldies required its tappet clearances proofed and head studs retorqued, making it the second “repair” within 500km. Here, another Triumph plus rider from Vienna joined us.

Photo: Patricia Sevilla Ciordia http://pscfoto.net

From Perpignan we set out via the country roads into the hills to have lunch at le Donjon de Pyrepertuse in Duilhac-sous-Peyrepertuse. After refueling the humans, the curvy roads of the Pyrenees took us through de Gorges de Galamus, with its steep cliffs cut by the rivers deep down below and a road hacked into the canyon walls with dramatic overhangs, riding this narrow road send the heart racing while dropping your jaw in awe. The contrast when going over Col d’Ares, across the border into Spain, was stark. Whereas the canyon is enclosed and narrow, the views from the mountains are wide and far. We overnighted at the campsite Vall de Camprodon. Here, we were united with an additional 3 riders who made their own way south with the support van, loaded with a Yamaha, Rieju, and a BMW. Having a support van would soon prove to be the smartest decision of the entire trip. Earlier, we got separated from the Guzzi that had ignition issues, but made its way to the campsite with a hand drawn paper map. It sure helps when you speak Spanish fluently. 


Photo: Cäthe Pfläging

The next morning we left for Montardit de Baix, via Castellar de n’Hug and Cadí-Moixeró Natural Park. We had divided the group into two smaller groups based on riding skills, which eased the riding, yet complicated the logistics. Windy roads, up and down mountains were a welcome change from the straight roads we usually ride around Berlin.

Photo: Cäthe Pfläging

Next morning, after a breakfast of toasted sandwiches, croissants, coffees, and orange juice, we set out for some more mountain passes. Unfortunately, the Moto Guzzi stayed behind, again. Though this time something had gone missing… the ignition key. Searching every pocket, trousers and jacket, twice, and after unloading and repacking the van, twice, and searching through all the camping gear, the decision was made to load the Guzzi into the van and catch up with the rest of the group. Meanwhile, atop a mountain, one of the other riders was rather surprised to find an unfamiliar key in a jacket pocket… Black leather jacket surely do look alike when the sun has gone down.

Photo: Patricia Sevilla Ciordia http://pscfoto.net

The third night we stayed in Boltaña. We caught a little bit of rain that day, and we moped about Spanish summer weather. Little did we know what tomorrow would have in store for us. 

After a peaceful sleep, the skies had cleared up a bit, and we happily got on our bikes for more windy roads. We tracked through beautiful gorges and over mountain passes with stunning views. The weather, however, was not on our side that day. We barely saw the sun, and the clouds grew a deeper grey. The groups got further split up, and I was in a group of four tracking north through the valleys towards camping Asolaze in Isaba. As the rain got more intense, we missed a turnoff and rode all the way to the end of the valley in what had become a torrential downpour. On the side of the pavement, small rivers of murky yellowish brown water had started to flow. More than once we saw the front wheel dip into a puddle up to the axle. At the end of the road we spotted an inn, we made it!
Except, the inn was not Asolaze, it was the Linza Inn, one valley east of where we needed to be, separated by a 1500m tall mountain. So we had to track back half an hour, ride over the mountain pass, and north again in the next valley. The 20km that normally takes less than half an hour, now took 45 min. The rain persisted and the insoles of my boots were drenched, water had gotten in everywhere. Rain gear is only water proof until it is not. Luckily we all made it to Asolaze without any incidents or accidents, and warm tapas awaited us. Another sponsored bike, a BMW R18 ridden by the mind behind North of Berlin motorcycle gear, joined us here. 

Photo: Patricia Sevilla Ciordia http://pscfoto.net

No rides were planned for the next day, so everybody was free to decide whether they would ride somewhere, or relax and dry their clothes. A few made tracks into the mountains to the Canfranc hotel in the Aragon valley. The former train station, built in 1928 on the border of France and Spain, stood abandoned from 1970 until in early 2023, when it welcomed its first guests as a hotel. A great stop for photos or a coffee.
Half of the group tracked back to the gorge south of Ansó to shoot photo and video for the various motorcycle, gear, and helmet sponsors. Shooting video while riding the two Moto Morini and the two BMWs was fun! Contrary to the day before, it was a right scorcher! Over 30 degrees Celsius is comfortable at the beach or manageable while riding, but standing in the bright sun in a full North of Berlin suit or Rusty Stitches denim and leather gear is another story.

Photo: Patricia Sevilla Ciordia http://pscfoto.net

Photo: Patricia Sevilla Ciordia http://pscfoto.net

Photo: Patricia Sevilla Ciordia http://pscfoto.net

At the end of the day, everybody rode to the top of the pass for a sunset and picnic dinner. The road conditions were excellent, the curves exciting, yet fog obscured the view and dinner was postponed. The last rider joined the group here, atop a stunning Ducati 999S, now totalling 18 people.

Photo: Cäthe Pfläging


Photo: Casper van der Ven

The next morning we set out for our destination: Biarritz! Due to the recurring ignition difficulties with the Guzzi, and a worn rear tyre on a Ducati, a small subgroup set out to San Sebastián to find a motorcycle shop. While the shop changed the tyre, the boys got their tools out and had a go at adjusting the Guzzi’s points and timing. They were rewarded with a sunset on the beach, a couple of beers, and the local specialty plates of food to share, pintxos, or Basque tapas. Think deep fried potatoes (Krokettas), battered meatballs (Bolas de Carne), and omelets (pintxos de tortilla). Ádamo is famous for theirs. Since it was the night before the summer solstice, or San Juan Eguna, local artists performed on a stage on the Padre Claret square next to Zurriola beach and the entire town danced the traditional folk dances into the night around a huge fire. The atmosphere was simultaneously ecstatic and relaxed, without having that all too familiar tacky tourist vibe. The Guzzi remained in San Sebastián. This time not due to technical difficulties, but because the rider gifted this motorcycle to his father, who resides here and has been considering getting back in the saddle. What a wonderful gesture!

Our base in Biarritz was at Camping Erreka, a central point to enjoy the festivities around Wheels & Waves. We went to the flat track races in San Sebastián, the concerts and vendor show at the Cité de l’Océan in Biarritz, and spent a day on the beach to rest our bodies after a week of riding all day, every day. Unfortunately, the swell was taking a rest too, and surfing was out of the question. We made up for it by cutting ourselves a large slice of Gâteau Basque, a buttery, crumby textured, tender cake, the local specialty. 

Photo: Patricia Sevilla Ciordia http://pscfoto.net

Photo: Patricia Sevilla Ciordia http://pscfoto.net

Photo: Patricia Sevilla Ciordia http://pscfoto.net

Photo: Janna Strauss

Photo: Cäthe Pfläging

After two nights at the festival, enjoying the concerts, the motorcycles on display, the shows, the vendor stalls, and meeting like minded people, we set out back towards Berlin. Via various mountain passes, including Col de Cloze and Col du Tourmalet, we made our way to Camping d’Esplantats in Sarrancolin. Riding in this part of France provides routes to everyone’s liking. What a wonderful part of the world! The local bakery provided us with croissants, coffee, and even flan, the caramel pudding, before setting out the next morning. Parts of the group had split off to make their own tracks back, due to different schedules and obligations. 


Photo: Cäthe Pfläging

After a long day in the saddle, over hills and through beautiful forests, we arrived at Camping Domain LaCanal, run by a Dutch couple. Though they weren’t quite open for the season, they put us up for the night and even cooked up an enormous breakfast the next morning. A lovely campsite on a hillside, with a fantastic view down the valley. Unfortunately, I had to retire the R80 and send it home with the van due to a blown seal and insufficient time to obtain parts, repair it, and make it to Italy in time for a wedding. Similarly, the Ducati 999 had to retire as well. It had tried spreading its wings the previous day, when someone took it for a top speed test on the local highway. It overtook me with a roar unique to a desmodromic twin with an open exhaust system. Shortly after I spotted a bright red panel on the asphalt, as well as two black tyre tracks, waving and crossing each other from the left lane, into the middle lane, across the right lane, and I feared to see motorcycle and rider separated on the side of the road. Due to skill and a huge dose of luck, both rider and bike were standing upright at the next exit, though the Ducati looked a little naked. The Italian Stallion had actually succeeded in shedding its wings. The wind had caught underneath the fairing and ripped both left and right panels off, almost throwing the rider off in the process. Shaken and flabbergasted, we all took a minute to count our blessings.

Photo: Casper van der Ven

The blown seal ended the trip a little early for yours truly, but thanks to the French and Italian public transport system, I actually made it to the wedding in Italy three days later. The rest of the crew tracked back to Berlin via the French and Swiss Alps. Keen to see more? Check out this video on Nils Homann’s channel (photo & video credit: Cäthe Pfläging, Patricia Strauss, Felix Schmidt)


Photo: Cäthe Pfläging
Photo: Cäthe Pfläging

The post Transpirenaica Chronicles: Riding the Pyrenees – A Symphony of Iron, Rain, and Resilience appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/transpirenaica-chronicles/feed/ 0
PRESS RELEASE: Knox expands distribution in Europe https://bikebrewers.com/press-release-knox-expands-distribution-in-europe/ https://bikebrewers.com/press-release-knox-expands-distribution-in-europe/#respond Tue, 31 Jan 2023 09:37:39 +0000 https://bikebrewers.com/?p=3411 Knox have appointed Jopa Racing Products as their sole distributor in Germany, Benelux, Denmark and Austria. This collaboration is part of Knox’s strategic plan for growth over the coming years by forging strong, long term export partnerships.

The post PRESS RELEASE: Knox expands distribution in Europe appeared first on BikeBrewers.com.

]]>

Knox have appointed Jopa Racing Products as their sole distributor in Germany, Benelux, Denmark and Austria.

This collaboration is part of Knox’s strategic plan for growth over the coming years by forging strong, long term export partnerships.

Quote from Margaret Travell, Sales Director at Knox.

“We are really excited to announce the appointment of a new European distributor, Jopa, who will be looking after Knox in Germany, the Benelux region, Denmark and Austria. Jopa are an experienced company with a great set up and team and we agree Knox will fit well into their existing portfolio.

The team at Jopa are focussed on supporting our existing dealers in these countries and then building a network of excellent stockists that align with the Knox brand”.

Quote from Matthijs Verbei, Director at Jopa.

‘Because of the unique philosophy and products of the brand Knox, we strongly believe that Knox is an absolute key-player in the future of motorcycle garments. We are convinced that we can be the bridge between Knox and dealers/customers to get these absolute top products there where they belong; on the road!’

About Planet Knox

Knox is a British company, based in the beautiful UK Lake District.  Since it started in 1981 the brand has had an innovative and unique approach to the development of motorcycle rider protection and apparel.

For Knox, making protective gear is much more than just the next wonder material, more than just the science of kilo newtons, CE levels and impact testing, more than a CE certificate. It’s a passion for making great products, developing new materials, designing better feeling, better looking, better performing garments that work for all riders in any climate and on any bike.

It’s about the synergy and balance between protection and motorcycle clothing, so they work in harmony.

About Jopa

Jopa Racing Products is an international distributor of road, racing and motocross products. Jopa serve a wide network of dealers throughout Europe with brands such as Sidi, Rusty Stitches, Furygan, PMJ, Just1, Simpson, FLY and many more.

With a close-knit team of enthusiastic staff, Jopa is committed to serving their customers every day. For more than 40 years, Jopa Racing Products has been the partner in road, racing and motocross products. Despite the growth, the philosophy remains the same: Jopa only want to provide you with the best possible products and service.

The post PRESS RELEASE: Knox expands distribution in Europe appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/press-release-knox-expands-distribution-in-europe/feed/ 0
The Mastodont – BMW R1100GS by Moto Adonis https://bikebrewers.com/the-mastodont-bmw-r1100gs-by-moto-adonis/ https://bikebrewers.com/the-mastodont-bmw-r1100gs-by-moto-adonis/#respond Sat, 19 Nov 2022 12:16:11 +0000 https://bikebrewers.com/?p=3310 Long before BMW gained popularity as the adventure motorcyclist weapon of choice, thanks to Ewan McGregor and Charley Boorman’s escapades and their Long Way-series, BMW already had a reputation for building bullet-proof adventure bikes.

The post The Mastodont – BMW R1100GS by Moto Adonis appeared first on BikeBrewers.com.

]]>

Dakar History

Long before BMW gained popularity as the adventure motorcyclist weapon of choice, thanks to Ewan McGregor and Charley Boorman’s escapades and their Long Way-series, BMW already had a reputation for building bullet-proof adventure bikes. It had everything to do with the company’s Dakar rally history, where it all started with the R80G/S back in 1980. BMW was a force to reckon with in the 1980’s all the way up until the end of the 1990s. The R80GS grew into the R100GS, which eventually transformed into the R1100GS; which was a completely different bike compared to the ones before.

Adventurers’ choice

When the R1100GS was first introduced back in 1994, it was a bit of an odd-looking machine, most notably because of the famous “beak”. Combined with BMW’s proprietary front Telelever suspension, it took a lot of people some time getting used to. Nevertheless, BMW built an extremely capable dual-sport machine, which took countless of travelers around the world. It was also extremely popular as a commuter and touring bike. There is a reason why you see so many BMW GS’s when you travel around in Europe. They’re comfortable, powerful, easy on fuel, reliable, and most of all, hassle-free. It doesn’t matter where you are in Europe, BMW can get you any spare part that you need, within 3 business days. And they’re usually faster than that.

Extraordinary

Which brings us to the topic at hand: the BMW R1100GS. Turning something as sacred as the a GS into something more aggressive and unique is not an easy feat. Luckily, we know a couple of guys who never back down from a challenge. As a matter of fact, Moto Adonis really do dare to do things differently. Like the Honda Monkey they built for Rusty Stitches. This particular BMW R1100 used to be owned by Job Leussink, co-founder of Moto Adonis. He sold it to a customer, who later decided that he wanted to have it built into something special and extraordinary. A sketch was made, and after approval, the angle-grinder was put to work.

The owner gave the craftsmen of Moto Adonis the full reigns and had only one hard condition: a flat bench. Achieving that on the GS meant removing the factory subframe and fabricating a new one from scratch. The seat was custom made by Miller Kustom Upholstery and finished in a luxurious brown leather. The fuel tank looks massive and is the centerpiece of this project. It’s a one-off unit built in-house by Moto Adonis. It’s big, bold, and makes the BMW look mean as hell. To complement the aggressive look, a custom 2-in-1 exhaust was fabricated by MAD exhausts, finished in a special black coating. A pair of custom-made fenders were built to match the rest of the bike. The original BMW wheels were retained and received a fresh coat of black paint and some aggressive Bridgestone rubbers.

Devil in the Details

It may not look that way at first, but there are a ton of details on this particular project. There’s the push-in screw fuel cap that looks very classy. The scrambler headlight, Biltwell grips, YSS shocks and small digital speedo courtesy of Acewell add just enough flavor to the mix. The steel braided brake lines ensure sufficient stopping power. All these parts work together really well. Combined with the blacked-out metal parts, green fuel tank, and brown leather seat, this BMW R1100GS has transformed into a real neck-turner. Hate it or love it, you most definitely won’t be able to keep your eyes off it!

Builder details:
Moto Adonis
Website
Instagram
Facebook

The post The Mastodont – BMW R1100GS by Moto Adonis appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/the-mastodont-bmw-r1100gs-by-moto-adonis/feed/ 0
Rusty Stitches commission – Honda Monkey Z50 by Moto Adonis https://bikebrewers.com/rusty-stitches-commission-honda-monkey-z50-by-moto-adonis/ https://bikebrewers.com/rusty-stitches-commission-honda-monkey-z50-by-moto-adonis/#respond Fri, 04 Nov 2022 11:51:15 +0000 https://bikebrewers.com/?p=3304 The Monkey and the Ape By now you should have a pretty good idea about who Rusty Stitches are and what they are all about. They are the David to the motorcycle riding gear industry’s Goliath. And they’ve been growing recently…fast! Although their mascot is a big hairy ape, the Rusty Stitches management team thought [...]

The post Rusty Stitches commission – Honda Monkey Z50 by Moto Adonis appeared first on BikeBrewers.com.

]]>
The Monkey and the Ape

By now you should have a pretty good idea about who Rusty Stitches are and what they are all about. They are the David to the motorcycle riding gear industry’s Goliath. And they’ve been growing recently…fast! Although their mascot is a big hairy ape, the Rusty Stitches management team thought it would be a good idea if the giant ape had its own ride. And what better bike to start with than a Honda Monkey!

If you want to get technical about the difference between a monkey and an ape; a monkey has a tail and is relatively small by size, and an ape has no tail and can grow much larger than a monkey. This is the story of the ape and the monkey!

The Honda Monkey was first introduced to the public in 1961, after increasing popularity as a children’s ride at a Japanese amusements park. Originally it was a 100cc minibike called the Z100 but quickly gained popularity amongst people in its 50cc trim as the Z50 a.k.a. “the Monkey”. Not a bad name considering it is one of Honda’s longest produced models in the company’s history. We’re not going to bore you with performance specs. What we can say is that people who owned them, loved them! It was an ideal vehicle to take on a trailer or on a camper. It’s lightweight, small, frugal with fuel, and easy to work on.

Cult status

The Honda Monkey has gained something of a cult status. In 2018 the late Beatles singer John Lennon’s old Honda Monkey Z50 was auction for a whopping $80,000! Not bad for a bike that initially cost about $250. What also increased the popularity of the Monkey is the availability of aftermarket parts. You can turn a standard 50cc Monkey into a fire-breathing, tire smoking, little ripper, capable of serious speeds.

Moto Adonis

This is where part 2 of the story begins. Enter: Moto Adonis. The Dutch based team consisting of Arthur Renkema and Job Leussink have been dabbling in the world of customization for some time now. As far as Rusty Stitches were concerned, Moto Adonis the go-to guys to get their custom Honda Monkey built. It was clear from the beginning which direction they wanted to go with this little bike. It had to look a lot meaner than the original Monkey, and they knew exactly how they were going to do that.

The little Honda got stripped of all its parts and received a complete rebuild from the ground up. One thing that wasn’t changed was the engine displacement. The reason for this was that the Honda will serve a promotional purpose only, travelling around to various Rusty Stitches dealerships and motorcycle shows. Besides, increasing the displacement would also mean going through a series of mandatory tests and complete re-registration; quite pointless for what is intended. What the engine did receive was a dry-ice vapor blast treatment, and a complete respray in black and white. Other than that, very little was kept of the original Monkey.

The original wheels were removed and saved for later. Instead, a pair of 12” oversized wheels were added with Maxxis NSR knobbly tires. To accommodate for the wheels, the front shocks were replaced as well as the triple clamps for wider units. Both front and rear shocks now have an increased travel. A round LED headlight was mounted using a unique set of custom brackets. Using an LED light was made possible by upgrading the original 6 Volts system to a more modern 12V power supply. A black aluminium handlebar is now in place, coupled with a beautiful set of white Biltwell grips to stay with the black & white theme. The front brake has been beefed up with a 2-piston caliper and bigger disk brake.

More than just a few parts…

Moving to the rear we can see an extended and widened aluminium swing arm. The little drum brake from the rear has also been replaced with a 2-piston disk brake conversion kit. The final drive was changed to a bigger rear sprocket. The subframe has been custom built and houses a café racer style hump seat. The seat has been custom made by Miller Kustom Upholstery. Look closely and you will notice the white stitching and lettering. We love such craftsmanship! It is worth mentioning that the entire rear seat was built from scratch.

There are 2 other real eye-catchers on this little Monkey: the tank and the exhaust. Let’s start with the tank. It is the original Honda tank but it received a fresh coat of black paint. What makes it special though, is the pin-striping that was applied by hand; an art form we don’t see much anymore. It was done by Huid & Staal’s very own Frank Bouwmeester. The other eye-catcher is the exhaust system, which was built from the ground up by MAD Exhausts. We have heard this Monkey in real life, and it sounds more like a Gorilla than a Monkey!

Trailer

That’s it then, right? Wrong. Remember the original wheels that were saved for later? They were repurposed to be used on a custom-made trailer. Built to resemble a giant banana box, the trailer was completely built from nothing to serve as a prop. That also means that the Monkey has a trailer hitch, and we think that it’s the cutest thing we have ever seen. The little engine that could…

Photo credits: Rob Willemsen

Builder details:
Moto Adonis
Website
Instagram
Facebook

The post Rusty Stitches commission – Honda Monkey Z50 by Moto Adonis appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/rusty-stitches-commission-honda-monkey-z50-by-moto-adonis/feed/ 0
BMW R80 – The Dude by UNIKAT https://bikebrewers.com/bmw-r80-the-dude-by-unikat/ https://bikebrewers.com/bmw-r80-the-dude-by-unikat/#respond Wed, 26 Oct 2022 09:31:13 +0000 https://bikebrewers.com/?p=3294 We have become accustomed to the motorcycles that leave the workshop of Unikat. The Warsaw Poland based outfit have their own unique take on a number of different motorcycles. That's why their motto is: "1-of-1". As in, there is and will only be 1 model of each of their handcrafted machines. From a business point [...]

The post BMW R80 – The Dude by UNIKAT appeared first on BikeBrewers.com.

]]>
We have become accustomed to the motorcycles that leave the workshop of Unikat. The Warsaw Poland based outfit have their own unique take on a number of different motorcycles. That’s why their motto is: “1-of-1”. As in, there is and will only be 1 model of each of their handcrafted machines. From a business point of view this could be seen as risky. But from an artistic point of view, well, there is no other way.

Luckily for us, the standard is pretty high when it comes to their custom built motorcycles, and the BMW you see here today is no exception. Built on behalf of Bartek Prokopowicz, a Polish movie director and lifelong petrolhead, Grzegorz Korczak decided to do something different this time. What started out as a standard BMW R80 police style motorcycle, has been transformed into a cafe racer styled tracker. What makes this 1978 BMW even more special is the treatment all surface areas were given to get a very distinct look. Take a closer look and you’ll see what we mean. Some parts look a bit rusty, and maybe even a bit rough and dirty. Make no mistake, this was done on purpose, through a series of rigorous processes, to achieve this unique, patina look. As if this BMW was built a long time ago. Very cheeky!

It’s clear that this BMW R80 is meant to look a bit rough and used, but that’s just one part of the story. Underneath the surface, everything was redesigned. Let’s start with the most notable changes, like the rear subframe. Or rather, the lack thereof. We see that on top of the minimalistic subframe a beautifully stitches single seat is resting. It almost looks as if it is floating. Some of the worlds’ smallest LED brake and indicator lights can be found underneath the seat.

To keep a clean look, the battery had to be relocated somewhere less obvious; underneath the bike. A custom battery bracket was fabricated to allow for the relocation. This gives the BMW a clean look. The engine and air intake has been kept stock for a change, and we love that! Everything was done to ensure the 800cc boxer is up to snuff, thanks to a thorough inspection and service. At the front the suspension was upgraded to YSS springs and received a pair of fork gaiters. A set of YSS fully adjustable twin shocks take care of business at the rear.

But there is more! Although the rest of the front looks stock, most isn’t. First there is the Motogadget speedo, that looks a lot smaller than the factory cockpit. A black aluminium handlebar replaced the stock steel unit. The handlebar grips have been wrapped with leather, and at the end of them, a pair of Motogadget bar-end indicators have been mounted. A classic oversize black round headlight adds to the distinguished look. The custom short fenders, the blacked out exhaust headers, and the twin brushed end cans all add to the classiness of this R80. No wonder it took almost a year to complete this project!

In the end, UNIKAT managed to create yet another timeless looking custom motorcycle. It’s hard to imagine that they built another bike simultaneous to this project. And yet, they did just that! Stay tuned for more, here on BikeBrewers.

Photo credit: UNIKAT

Builder details:
UNIKAT Motorworks
Website
Instagram
Facebook
YouTube

The post BMW R80 – The Dude by UNIKAT appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/bmw-r80-the-dude-by-unikat/feed/ 0
REVIEW Rusty Stitches Motorcycle Fashion https://bikebrewers.com/review-rusty-stitches-motorcycle-fashion/ https://bikebrewers.com/review-rusty-stitches-motorcycle-fashion/#respond Sun, 28 Aug 2022 16:31:40 +0000 https://bikebrewers.com/?p=3272 Some time ago we received a care package from Rusty Stitches. For those of you who are unfamiliar with the name, we suggest you start reading this first. The now Dutch band of misfits is working hard to make a name for themselves in the custom and urban motorcycle riding gear scene, and boy are [...]

The post REVIEW Rusty Stitches Motorcycle Fashion appeared first on BikeBrewers.com.

]]>
Some time ago we received a care package from Rusty Stitches. For those of you who are unfamiliar with the name, we suggest you start reading this first. The now Dutch band of misfits is working hard to make a name for themselves in the custom and urban motorcycle riding gear scene, and boy are they making some noise!

The BikeBrewers editorial team are motorcycle enthusiasts pur sang. We ride our bikes every day of the week, come rain come shine. These aren’t just a hollow statement; these are facts. We pride ourselves with the fact that we are die-hard riders. That also means that we really do use the gear we receive for testing on a long-term basis. The same applies to the gear we received from Rusty Stitches, trusting us to give an honest and unbiased opinion not only as editors, but also as users. We’ve been using the Rusty Stitches gear extensively the past couple of months, and now it is time to share our experiences with you.

The package we received consisted out of:

  • Jari Leather Jacket
  • Chase Leather Jacket
  • Fonzie Helmets
  • Johnny Gloves
  • Gordon Leg Bags
  • Rusty Stitches T-shirts

We had some fun unboxing the package! Make sure to check out the video below:

Leather Jackets
We received a pair of leather jackets in the sized M and XXL. The black Jari Jacket and yellow Chase Jacket are very similar in many ways. They both are made from the same thick but supple leather. What makes the Chase stand out is, without a doubt, the bright colour. It is available in black, red and yellow, with yellow being their number 1 seller since the very beginning. The black Jari jacket looks more subtle and less in-your-face than the Chase. Both have the same specifications and come with 2 faux chest pockets that actually contain vents. They come with removable shoulder and elbow protectors, but a back protector is missing. This can easily be added since a protector pocket is provided.

These two jackets fit perfectly and have adjustable waist and wrist bands. They’ve proven to be incredibly comfortable, and the comments people gave us was always positive. They look like they come from a different era, which fits the retro and classic bikes we ride perfectly. Adnane wore the Jari jacket one a 4-day, 2000 km trip to the Vosges in France. The Jari jacket held itself incredibly well. However, what really got the mouths talking was the yellow Chase jacket. Everybody mentions Kill Bill or Bruce Lee when they see the jacket! We think it’s one of the best looking jackets out there. Made from the same quality leather as the Jari, the Chase is really for those that don’t mind the extra attention. Did we mention that it looks so damn good?!

Fonzie helmets
There are cool helmets, and then there are cool helmets if you know what I mean. We got our hands on 2 different colour Fonzie helmets: black & white, and black & yellow. Both are technically identical and consist out of a matt coloured outer shell, with a leather and suede interior. Lush! The first thing that we noticed was how lightweight the helmet felt in our hands. The second thing that we noticed was just how snug of a fit the helmet had. No surprise there since Rusty Stitches offers the helmet in 5 different shell sizes. Despite the good fit, on a hot day the Fonzie helmet never felt uncomfortable. This is mostly thanks to the Silvercool liner. Aside from all the technicalities, it is one seriously good looking helmet, that fits really well around most people’s heads due to the wide range of sizes available (XS-4XL). For those that want to, there is a detachable peak available, as well as a 5-steps adjustable visor. We just wore ours with goggles or sunglasses, making it the perfect modern retro helmet at an incredibly affordable price point.

Johnny Gloves
We don’t understand how Rusty Stitches pulled this one off. The Johnny gloves look so incredibly good, surely everybody with a retro or classic styled motorcycle should have one by now. If you’re reading this and you don’t know what we are talking about; the Johnny gloves are some of the most comfortable leather riding gloves we have ever had wrapped around our hands. It looks like a workers glove, designed to do a tough job all day long without getting uncomfortable. It has that worn-look that makes it incredibly desirable. These gloves were also worn during Adnane’s 2000 km trip. Like most leather gloves, it takes a moment for the leather to stretch around your knuckles, but once it’s set, you never want to take them off again. An interesting fact is that although these are designed as summer gloves, the can handle cold temperatures pretty decently. We love that these gloves are available in different colours such as yellow and red, just like the Chase jacket.

Gordon bag
This item has a somewhat debatable reputation. Some people love it for its practicality, others think it looks bulky. However, after using the Gordon bag for some time now, we have come to the conclusion that its looks aren’t as disruptive as one would think. Also, having a bag on your hip/thigh is a lot more comfortable than on your back, or putting all your stuff in your jacket pockets. It definitely has proven its value on a long trip. The Gordon bag is just big enough to fit your wallet, phone, and other small items such as keys. Attaching the bag to your leg is super simple with to adjustable straps that use a clicking system.

Rusty Stitches T-Shirt
The Rusty Stitches T-shirts must be our most favourite and most worn items we had received. Not just because of the beautiful original prints, but also because you don’t have to be a biker to wear one. They look cool as hell, and are incredibly comfortable. After more than 5 washes the colour and printing still looks like new, which is a testament to the high quality material that is being used by Rusty Stitches. They have a normal fit, and are made out of 100% cotton. Rusty Stitches offers over 14 designs, some of them are long sleeved, and other are short sleeved. It’s hard not to like one of their designs!

Verdict
Overall we think that Rusty Stitches is doing a great job at offering high quality urban and retro motorcycle gear, at an astonishing price point. I remember when I first got my motorcycle license and I wanted a cool jacket, helmet and gloves, and I couldn’t afford any because it was so incredibly expensive. Thanks to new players like Rusty Stitches, everyone can look cool while being safe on their classy motorcycle. By the way, all their motorcycle gear is CE-approved, meaning that it meets European requirements for road-safety. We wouldn’t want it any other way. And remember: Don’t feed the monkey!

Photo Credits: Dan Sugrue & Ron Betist

The post REVIEW Rusty Stitches Motorcycle Fashion appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/review-rusty-stitches-motorcycle-fashion/feed/ 0
New kid on the Block: Rusty Stitches https://bikebrewers.com/new-kid-on-the-block-rusty-stitches/ https://bikebrewers.com/new-kid-on-the-block-rusty-stitches/#respond Sat, 21 May 2022 13:01:50 +0000 https://bikebrewers.com/?p=3249 Rusty Stitches; the name may sound familiar. Originally from Scotland, Rusty Stitches is now brought to Europe by Jopa Racing Products. The brand, which started with offering a number of affordable leather jackets in the Netherlands, Germany and Belgium, has expanded its range with several new jackets, gloves, accessories and is now offered in 15 [...]

The post New kid on the Block: Rusty Stitches appeared first on BikeBrewers.com.

]]>
Rusty Stitches; the name may sound familiar. Originally from Scotland, Rusty Stitches is now brought to Europe by Jopa Racing Products. The brand, which started with offering a number of affordable leather jackets in the Netherlands, Germany and Belgium, has expanded its range with several new jackets, gloves, accessories and is now offered in 15 different countries in Europe. The company is also making steps towards Asia and the US. Their products are mainly aimed at the urban rider and are slightly different from others, which fits seamlessly with the philosophy of Rusty Stitches as a brand.

About Rusty Stitches
What started as an idea in Joshua Nap’s head has grown into a brand that stands out from the rest and meets the needs of its customers while also remaining interactive and engaged with its end users.

Rusty Stitches is committed to provide motorcyclists with the very best in motorcycle fashion while also keeping it affordable. The inspiration comes from the out-of-the-box thinkers and fashion lovers. The result is unique motorcycle fashion pieces! But this is only the beginning as the range is growing, but the core values ​​always remain the same: cool and affordable motorcycle clothing!

Make sure to head over to the Rusty Stitches website and check out their gear for yourself, because that’s what we did.

As a matter of fact: we will be reviewing a number of Rusty Stitches most popular products in the coming weeks. Wanna know what we think? Make sure to stay tuned here on BikeBrewers.com

The post New kid on the Block: Rusty Stitches appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/new-kid-on-the-block-rusty-stitches/feed/ 0
Pando Moto – Boss Dyn 01 jeans review https://bikebrewers.com/pando-moto-boss-dyn-01-jeans-review/ https://bikebrewers.com/pando-moto-boss-dyn-01-jeans-review/#respond Fri, 04 Feb 2022 04:30:58 +0000 https://bikebrewers.com/?p=1967 Dressed to stay alive We all have our preferences when it comes to dressing up for a ride. What you wear depends on a variety of parameters dictating the outcome. ‘Full on’ motorcycle gear will serve the best protection against weather conditions and when gravitational forces cause you to involuntarily part from your bike and [...]

The post Pando Moto – Boss Dyn 01 jeans review appeared first on BikeBrewers.com.

]]>

Dressed to stay alive
We all have our preferences when it comes to dressing up for a ride. What you wear depends on a variety of parameters dictating the outcome.
‘Full on’ motorcycle gear will serve the best protection against weather conditions and when gravitational forces cause you to involuntarily part from your bike and you end up kissing the surface. However, when you manage to wheel to your destination in an upright position this gear if far from stylish.

It is designed to fit well on a motorcycle, but walking around in it is often far from pleasant and you will look like your tailor has lost his eyesight overnight.

Fortunately there are a number of brands that have managed to find solutions to produce gear that looks under all circumstances. The origin of denim, a very strong cotton called ‘Serge de Nîmes’, as we know it today dates, back to the late Middle Ages and it was Levi Straus in the late 19th century who came up with the idea of the jeans as we know them today.
However strong the cotton threads may be, they will not protect you a lot when you are sliding across the tarmac.

Testing, testing 1, 2, 3
About two years ago I put the Pando Moto Steel Black 02 to the test and decided to slide on my behind for about 20 meters. I was amazed how little damage was done. Yes my ego was bruised badly after this first fall in over 30 years, but the jeans had nearly no physical damage. No tears, no holes, just a little bit of cloth scraped off the top where my hip contacted the road surface.

It can’t be a surprise I was instantly enthusiastic when the boys and girls from the Lithuanian-based factory sent us another batch of clothing to review. No, I have no intention to opt for another slider, but wearing the jeans to share feedback on design, comfort and durability.

Like a Boss
Opening the box I found a BOSS DYN-01 in my size (32-32). It is a greyish black colour, which is the only colour they come in. To be honest, I am more a fan of the (very) deep black colour of the ‘Steel Black’, but after washing it a couple of times that had faded a bit too.

This is how Pando Moto describe this item on their website: “Extremely durable 12 oz super-stretch CORDURA® denim combined with COOLMAX® technology ensures full comfort and maximal protection to give you total peace of mind on the road. In addition, the protective knit UHMWPE lining provides optimal safety in high-risk impact areas. European style meets precise design in the Boss-Dyn 01; featuring a smooth design with no external stitches on the front, these slim-fit jeans have very discrete embroidery and two-position knee armor pockets. CE officially approved PPE under EN 17092, level AAA (92 meters slide distance) safety means unparalleled protection throughout.”

I read a challenge here, obviously my 20 meters of sliding only qualify as ‘amateur status’.

In real life
Having worn the jeans for two months during the winter period I can only say I am a fan.
On days I was not riding my bikes, I just took out the knee and hip protection (they are fitted out with both) and wore them as regular jeans. There are pockets on the inside of the pants that make it very easy to take the protection out and put them back in again.

The jeans are extremely comfortable to wear all day, not in the least thanks to the elastane which is woven into the cloth and provides stretch.
When you switch back to regular jeans again the difference in thickness of the material is apparent. A clear sign of the protection the Pando Moto jeans offer.

There’s a sewn in mesh front and the full protective layer in the back. Funny fact; when you put the pants on a cold winter morning, you get a ‘steely’ cold sensation on your behind caused by the protective layer. It warms up quickly though but the first thought is that the seat of the pants are wet. Considering the thickness of the material, I am curious how it will hold up on a hot summer day.

Verdict
Motorcycle jeans are coming of age. There are a number of manufacturers that produce the style I like and Pando Moto is top tier as far as my personal taste is concerned. They fit very well, the sizing is excellent for my (slender) type of legs.

With the knee protection in, the space in that area tends to be a bit on the tight side, especially when riding in a sportier position with your knees high up. I am not sure how that would work out with riders who have real muscular legs.
My advice, try them out sitting in the position you will be riding in most and decide if this (slim fit) model is the right one for you.

Manufacturer’s details:

Slim fit. Middle waist.
13 oz single layer super-stretch Armalith® (15 times stronger than steel).
It has high heat conductivity, reflects the heat.
Fully CE approved – performance level AA (70 km/h abrasion resistance) in accordance with FprEN 17092.
SAS-TEC TripleFlex CE (EN1621-1:2012) approved knee armor INCLUDED.
SAS-TEC TripleFlex CE (EN1621-1:2012) approved hip armor – INCLUDED.
Reflective cuffs for safety ride.
Reinforced with chain stitches.
Unique hand-made ageing (washed down).
Embroidery in the front.
Made in Europe.

The post Pando Moto – Boss Dyn 01 jeans review appeared first on BikeBrewers.com.

]]>
https://bikebrewers.com/pando-moto-boss-dyn-01-jeans-review/feed/ 0