The post Unleashing the Beast: The Triumph Rocket 3R Supercharged by Roké Motors appeared first on BikeBrewers.com.

The post Bangkok’s Bike Builder – Zeus Customs appeared first on BikeBrewers.com.

Intro & Ingredients

Once in a while, you strike gold! The motorcycle I’m writing about today made its first appearance in the wild at the Big Twin Show in Houten, the Netherlands, earlier this month. In our case, we got a bit (a lot) of a head’s up. I have been personally involved since a frame and a few crates of parts were inspected and, after a haggle and a handshake, collected. We have previously posted about a Blast from the Past, and about a Modern Interpretation of the famous concept. While often considered the first cafe racer and the heritage of custom builds, these bikes are now considered unicorns. They often find a home in a living room or a museum, rather than a garage. A few years ago, we were brave enough to call it “one of the most legendary machines out there”. What I am referring to is the ‘Triton’, a Triumph engine in a Norton frame. These bikes were built in the UK between 1950 and 1970, in various attempts to put the fastest engine into the best handling frame.

Here, I would like to present one built in the Netherlands, in 2022. The basic recipe for a classic Triton is relatively simple:

1. Norton (Wideline) Featherbed frame – 1pc.
2. Triumph Pre-Unit 650 twin engine – 1pc.
3. Roadholder fork – 1pc.

Trying to source these main components is one thing, trying to make them fit each other and look good is another… Let’s get into it!

It’s all in the details

Georges Martin, inspired by Egli, built this particular frame and swingarm based on the Norton wideline featherbed measurements. He ingeniously routed an oil line inside the frame for the crankcase breather.

Piet from Land’s End Motorcycles in Hengstdijk, the Netherlands overhauled the 650cc 360° parallel twin engine. He increased the capacity to 750cc, plugged in matching pistons, and topped it off with a T140 head to convert to a pushover exhaust. Furthermore, he installed a belt-driven Bob Newby racing clutch to transfer all 55 horses to the Norton AMC transmission. Yes, that is the same Bob Newby who won several TTs in the 1980’s. All this mounts into the frame with waterjet cut 7075-T6 aluminium brackets. Piet also serviced the Roadholder forks and mated these to the frame. He further modified the frame to also fit the polished aluminium oil tank behind the engine and underneath the seat.

Rolling along

In the front, Haan Wheels in Schijndel laced a Grimeca 4 (!!!) leading shoe hub with stainless steel spokes and a 19″ Morad high shoulder rim. The 18” rear around a weight-reduced conical hub. Both were drum-polished to achieve that top shine finish. Bridgestone Battlax BT45 rubber ensures optimal contact to the road surface.

A touch of modern

Not all on this bike is a collection of old and refurbished parts from the Netherlands, Belgium, France, Germany, Austria, Italy, the UK, and the US.

If you look closely, the vintage Tommaselli Matador levers neighbour modern Motone CNC milled aluminium push button controls. This is one of the hints at what lies underneath the shine. When laying new wiring, one might as well go all the way and replace analog fuses and switches with a digital control unit. In this case, a MotoGadget mo.unit replaces all relays and fuses, and simultaneously simplifies the wiring. The pulse switches control the unit via a low current circuit, allowing for small diameter wires inside the clip-ons. The thicker wiring for 12 volt supply to the power draining components are thus no longer routed via the switches. Yes, I’m looking at you, H4 headlight!

The chrome headlight bucket also houses a digital voltmeter and LED indicator lights for the high beam, oil pressure, and the indicators. Bright as the sun, these tiny LED indicators are another hint at the high-tech core of the motorcycle. We concidered and accepted these modernisations, because the original manufacturer of Triumph and Norton lights, Lucas, is jokingly known as ‘the Prince of Darkness’.

When you are on the bike, you can clearly see the indicator lights and voltmeter when you peak between the original Smith’s tacho and speedo. Bob Carter in the US rebuilt these, since some things are best left to the experts.

Hand built

Behind these beautiful gauges sits la pièce de résistance, a handbuilt aluminium petrol tank. It subtly dips below the spine of the frame, yet perfectly aligns with knees where it narrows to meet the seat. Combined, the curvature of the tank and the seat play a large part in the aesthetic that stops people in their trot. They often utter something along the lines of “I have no idea what it is, but it’s beautiful”. The seat hump houses the lithium ion battery and control unit. Maarten, or Yellow Rider, Zevenaar, famous for converting Yamaha’s into vintage racers and board trackers, made it by hand, since the available humps did not follow this curvature. The broad silver band aligns with the metal strap that secures the tank. Seats are his specialty, and his craftsmanship shows!

One of the largest challenges with this build was to find parts that fit. And when you cannot find something, you fabricate it. There is a lot you can bolt on nowadays, almost all manufacturers offer parts to personalise your bike further. Aftermarket suppliers often go as far as offering various types of entire kits to convert your motorcycle. Just sometimes, your hand tools are not sufficient to fabricate the parts needed, and that’s when you call the cavalry.

Maarten also crafted the base plate and adapted the subframe hoop before it went to powder coating. RAL 6005 with a structured finish is a unique combination that is a tad lighter than the famous BRG. British Racing Green. It really makes the bike pop and sets it apart from that traditional black, chrome, red colour scheme. Finally, Maarten fabricated stainless steel actuator and anchor rods for the rear brake and gearbox, as well as the brackets for the Norton Peashooter exhausts.

Big (T)winner

At the show, we’re getting very curious about the sound. And with us, a few other people in the audience looked at the cafe racer category winner at the Big Twin Bike Show with great anticipation and hope. Luckily, after tickling the Amal 930 carbs, a firm kick draws in the air via  DNA filters, the Beck electronic ignition generates a spark, and the parallel twin roars. Just a tad louder than the crowd ;)

Um cassino on-line que oferece acesso a uma variedade de jogos de azar, incluindo caça-níqueis, roleta, pôquer e muito mais emhttps://betandreas.br.com/

Photo credit: Jan Eggink Photography

The post A Modern Legend appeared first on BikeBrewers.com.

Triumph goes electric in style
Project Triumph TE-1 has just been revealed in completed prototype form.
To get to this stage Triumph Motorcycles set up a collaboration with Williams Advanced Engineering (WAE), Integral Powertrain Ltd, and WMG at the University of Warwick. The project is funded by the Office for Zero Emission Vehicles through Innovate UK. This fund was set up to create ground-breaking developments in specialist electric motorcycle engineering and innovative integrated technology design.
Well, as far as looks go they are on the right track at least.

Next stage
Marking the official end of the collaboration stage of the TE-1 project, the completed demonstrator is now fully ready for the next Triumph-led stage of the project to begin – the live testing programme – integrating for the first time all of the latest and final innovations from the project partner workstreams.

Energy source
The WAE battery pack incorporates dedicated cell packaging for optimum centre of gravity, vehicle control unit, DCDC converter, integrated cooling, charge port, and styled carbon covers. This all-new WAE-developed powertrain will set new standards for electric bike performance, with class-leading power, efficiency, charging time and range.
Wholly responsible for TE-1’s lightweight, ground-breaking battery system, WAE has employed a holistic approach to development which will allow riders to use more electric power for longer, providing access to outstanding performance regardless of battery charge, alongside rapid charging times.

Proper power
The all-new battery has peak power of 170kW and continuous power of 90kW, with a capacity of 15kWh. This enables the motorbike to deliver 130kW of peak power and 80kW of continuous power. Class leading system cooling combined with the optimum balance of power and energy means TE-1 can give the rider more electric power for longer and deliver outstanding performance regardless of battery charge. The 360-volt system also enables a fast-charging time of under 20mins (0-80%), which is combined with a market leading target range.

Weight balance
WAE has optimised the battery module layout to balance mass and positioning within the prototype chassis taking into consideration centre of gravity, space and relationship with the powertrain and charging approach. A new and bespoke vehicle control unit has been integrated into the battery pack to minimise weight and packaging.
Key project achievements during this phase include test results that exceed current benchmarks and targets set by the UK Automotive Council for 2025, providing a platform with great potential for future development in electric motorcycle performance.

The overall objective of the TE-1 project has been focused on developing electric motorcycle capability, in order to provide an input into Triumph’s future electric motorcycle offering, driving innovation, capability, and new intellectual property, and enhancing the credibility and profile of British industry and design.
With the completion of the prototype demonstrator, the full live testing phase of the TE-1 project will now begin. Over the next six months the prototype demonstrator will undertake an extensive live testing programme within Triumph’s state-of-the-art facilities, including rolling road and track testing, designed to provide direction into the final set up and calibration of the prototype demonstrator.

Going live
At the completion of the live testing phase, estimated to be Summer 2022, the prototype demonstrator will be updated with its final body panels in readiness for active track demonstration. At this time, final specifications and testing outcomes will be published, as well as insights and key facts on how the TE-1 delivers on the project targets including final battery and range performance.

If Triumph are looking for volunteers, the BikeBrewers team members are ready to pack their toothbrush in a jiffy.

What the boss says
As we do not take any marketing speak for granted, we gave the Triumph Motorcycles CEO Nick Bloor a call. Here’s what he has to say: “It has been truly exciting to see the progress made during phase 3 of Project Triumph TE 1 with the final prototype motorcycle now going into real life testing. Everyone involved at Triumph is proud to have been part of this innovative British collaboration. Personally, I am thrilled with the results we have already achieved with our partners, and the exciting preview of the potential electric future to come. We look forward to continuing the ambitious and innovative work on the TE-1 demonstrator prototype through the live testing phase and sharing the outcome with Triumph fans across the world.”
The demonstrator bike is now undergoing final battery level validation and calibration to ensure the performance results meet best-in-class power and energy density targets and for the rider, ensuring there is no compromise in performance at low levels of charge.

Our point of view
BikeBrewers are deeply rooted in the custom scene. We are purebred petrolheads by definition.
Still, we do recognize that electric is an important factor in future mobility. We are regularly testing electric bikes and are in general quite enthusiastic about the experiences we have had. There are quite a number of road tests on electric motorcycles scheduled for 2022 and we will continue to report and share our findings.

But truth be told, after each electric adventure our hearts jump with joy each time we get back on our loud, smelly and noisy machines.
That is just us speaking though.

What we REALLY want to know is how YOU feel about all this!
Please share your uncensored comments on this bike and riding electric with us.
We have some nice give-aways in store for the best comments.

More background on WAE can be found here

The post Finally! Electric goes Triumph TE-1 prototype appeared first on BikeBrewers.com.

Superlative
To top off three consecutive weeks of riding big (or should I say GIANT?) bikes I was offered the opportunity to test the 2021 Triumph Rocket 3R for a full seven days.
And what a week it turned out to be!

The prelude to this week was composed by the BMW Motorrad R18 Transcontinental and the Indian Roadmaster Heritage (post to be published). Both machines are fitted out with 1.800cc engines and pack an impressive amount of ‘oomph!’ in the torque department. The horse stable is quite overcrowded too.

I am happy to ride nearly any bike but there are those that give you extra pleasure. The BMW and the Indian are sort of similar bikes in spite of the totally different styles. I try to adopt myself and my riding style as much as I can to fit to the bike I am testing. On most occasions I managed to keep my inner demons and the hooligan safely locked away in the panniers of those bikes, but the Triumph is a naked bike without such storage options.

Do I like it?
When Triumph launched (pun intend) the Rocket back in 2004 the whole world thought the engineers had gone completely bonkers. How much fun these guys must have had when they were designing that machine though.

Truth be told, being a caféracer afficionado, I was never a big fan of the Rocket. I just did not see the point in creating such a monster cruiser with a rear tyre fatter than fitted on most cars and a stonking 2.3-litre engine between your thighs. As said those engineers must have created it to shock and surprise – and they managed to do just that. It was impressive and scary. Still leaving the happy few with a whopping grin as they summoned its ungodly torque.

3 times lucky
With all of the above in mind I was never really tempted to try this bike out. But with the new 2021 ‘3’ design, which is a major improvement in my view, the time was right to swing my leg over the seat and hit the launch button.
It’s an imposing € 30,000+ motorbike that comes in two editions – the R, and the more laid-back, long-distance GT. The latter comes with footpegs mounted forwards , a decent windscreen and a pillion backrest over the back wheel.

Powertrain
Both Rocket 3 ‘R’ and ‘GT’ trims share the same powertrain. Triumph are in a league of their own, fitting the largest production motorcycle engine in any motorcycle: 2500 cc’s over the previous 2300 cc’s.
While increasing the number of cc’s, the madmen at the Hinckley R&D department managed to shave off nearly 17 kg’s compared to the Rocket’s predecessors thanks to all-new aluminium frame. It weighs 291kg without any fluids. It’s still a substantial chunk of metal. The motorcycle now produces class-leading 167 hp at 6,000rpm (redlining at 7.000 rpm) and a mammoth 221Nm of torque at 4,000 rpm.

All this power goes through a six-speed helical gearbox with a ‘Torque Assist’ hydraulic clutch. The bike I rode was fitted with a quick-shifter, which is as an optional accessory. When called upon, the horses in the stable are led to the rear wheel using a longitudinal shaft drive to give the rider all the fun he (or she) is ready to handle.

Styling
Triumph gave the Rocket 3 the limited edition treatment with only 1000 examples of each of the R & GT variants globally. Upping the exclusivity game, each Black edition Triumph will receive a Certificate of Authenticity and a customizable motorcycle VIN for each bike.

Moreover, for an already incredible-looking motorcycle in the flesh, the attention to detail has been taken to the upper echelons, giving it an even more menacing appearance. Common between both variants is carbon fibre front mudguard, completely blacked out exhaust fenders, heat shields, end caps, and an exquisite crinkle back powder coating on the engine’s intake covers. Besides, Triumph further enhanced the bike with the front mudguard holders, headlight bezels, fly-screen, radiator cowl, and so on.

The list doesn’t stop there as Triumph’s designers gave a black anodized finish to the bike’s handlebar clamps, yokes, riders, fork lowers, brake and clutch pedals, rider footrests, heel guards, and the innovative folding pillion footrests

Triumph really attended to even the smallest of details and managed to put the icing on the cake with the black anodized paint job and a magnificent aluminium finish on the bar-end mirrors.
All the similarities aside, the main differences between the R & GT variants include a slightly sportier stance for R with the mid-positioned footpegs, wide handlebars, and a matte black livery with a blacked-out Triumph logos and a glossy white stripe running down the centre of the fuel tank.

For the riders who are more adult than me, the GT variant has more relaxed ergonomics for the rider & pillion with forward-set footpegs, an adjustable windshield, an easy-to-reach handlebar with heated grips. Passengers are cared for by mounting an adjustable backrest.

Furthermore, it gets a triple black paint scheme with ‘50 shades of black’ on the fuel tank to distinguish itself from the sporty sibling.

Ride baby! Ride!
I mentioned before this is an imposing bike. Definitely not fit for novice riders. Still, once you are on the seat, is less scary instantly. The seat is mounted low, and the weight is buried low in the chassis, so although it takes an effort to get it off the side stand, it feels nicely balanced. The engine fires up and wobbles the bike gently to the left-hand side

As I set off on my first flight on the Rocket, it immediately felt like home. It is a gentle giant when you treat it as such. It is an amazingly easy bike to ride. It really handles like a Street Triple. The engineers have done an incredibly good job there as well. Everything about it is impressive as you’d expect with this much torque, pulling away is simply a case of easing the clutch lever out. My brain told me to short-shift up into second gear before giving it the spurs, but my inner demon was hitting the adrenaline pump switch. It was not before long that my hooligan persona was the pillion passenger, whispering sweet nothings in my ear…

Fast, faster fastest
There are more than enough electronics aboard to make you feel confident enough to open the throttle once in second gear. That’s where the band starts playing! Before you realize the front wheel is no longer touching the tarmac and the 24cm-wide rear (240/50 R16!!) tire digs in for traction. As a result you launch yourself forward at warp speed. The fact that the Rocket pulls this mind-bending, vision-distorting trick from just 2,000rpm onwards, makes for an utterly hilarious ride. You just feel like you’re are on a drag strip constantly and you are just in it for the ride, hanging on for dear life.

It is hardly surprising the Rocket 3 has set a Guinness World Record of 2.73 seconds to 0-100 km/h.
Me being me, I got overly self-confident rapidly. While on a slightly wet highway, cruising at around 120/130 km/h, I shifted down and hit the throttle to overtake the car in front of me. Suddenly all warning lights on the dashboard flared up as the rear started twisting just before the minions in the traction control department decided to help me out.

WHOAA! That was an exciting moment. Yes, the torque is truly unbelievable. Never before did I experience such powers on a bike.

Who needs one?
I asked that same question when riding the BMW and the Indian too.
The amount of money you’d spend on bikes like that is extreme. All of them are in the € 30.000+++ segment. The BMW and the Indian go up to € 40.000 easily once you start selecting the available options.

The Indian Roadmaster Heritage and the BMW Transcontinental are ‘luxury liners’. You can have miles for breakfast and be home for dinner still after a full day of riding, still feeling quite relaxed. Answering the ‘why’ question with the Triumph Rocket 3 was much harder. It is not a bike you take out to commute on a daily basis, nor is it a machine built to go on long roadtrips (I’d do it still, just for the fun of it). So who is this meant for?

Even my contacts at Triumph had some trouble coming up with a defining response. However we all seem to agree that is a fun machine for those who are in it ‘for the ride’ as Triumph puts it in their corporate slogan. If you are lucky enough to sit on a lot of ‘disposable income’ and want to stand out from the crowd, this is the definite motorcycle to go for.

If you are such a lucky person, I can only say: ‘go for it! You only live once!’

Looking ahead
This winter we will be following our friend Bas Kentrop at Roké Motors.
He is an amazing mechanic who managed to create a monster supercharged Triumph Thruxton R a few years ago. This bike packs an impressive 175 Nm and 171 Bhp.

We rode that machine back in 2017. We filmed the experience and made it one of our best viewed clips on our YouTube channel. Unfortunately the sound of this beast was so loud, it just killed the microphone, which we only found out in post-production. Our video editor decided to add in a little piano music, much to the dismay of the majority of the viewers (just look at all those comments..). We will re-make this video in 2022 as we have retrieved the current owner. Including the real sound. Promise!

Anyway, Bas will be working on a supercharged version of the Rocket 3. Can it get any wilder than that we ask? Watch this space as we will give regular updates on the progress of this project and I will be road testing it in Spring of next year.

Until then, I will just enjoy the memories of my love affair with this standard Triumph Rocket 3.

 
All in all
The Rocket is a superb machine and more. It handles phenomenally, the power is awesome and you can enjoy the bike in any way you want. You can ride it as a cruiser or race it around. It is really up to you, your experience, your mood and your testosterone levels.
The setup of the fully adjustable Showa suspension is so well done that you’ll just ride the Rocket 3 like a regular street bike. It will tempt you to stick your elbows out and punch it into corners like a Speed Triple on steroids.

The riding position on the R model is relaxed and inviting you to just ride on. The brakes are magnificently strong. Those Brembo Stylemas are of superbike standards. They do their job very efficiently and you need them on a bike like this.

Yep, the rear brake is ripped from the front of a sports bike. And it’s a good thing too – you’ll want to use the back brake to settle it in corners and hammering it really helps bring you to a stop in a straight line, unlike on most bikes.
The Rocket gets the same TFT dashboard as mounted on the Triumph Scrambler 1200, and it has an 18-litre fuel tank which will get you just over 200 km’s. Unless you are like me of course. I needed a pit stop at around 180 km.

Electronics and other fun stuff
Being the top of the line model in Triumph’s line-up, the manufacturer fitted a whole suite of electronics to enhance the riding experience:
•Triumph Shift Assist (up and down quickshifter)
•Heated grips (standard on the Rocket 3 GT)
•Tire Pressure Monitoring system
•Advanced 6-axis Inertial Measurement Unit (IMU) measures the roll, pitch, yaw & acceleration rates of the bike in real-time and unlocks features such as Lean sensitive traction control and cornering ABS keeping the rider in safe hands at all times.
•Full-color TFT display instrument cluster.
•Preinstalled with Triumph’s ‘My Triumph’ app with support for smartphone music, calling, & navigation controls.
•Unique to Triumph motorcycles, you also get GoPro controls.
•Both motorcycles get 4 Riding modes: Road, Rain, Sport, and a Rider configurable mode to adjust throttle response and traction control.
•Added are Hill Hold Control, Cruise control, keyless ignition, steering lock, and fuel cap opening
•LED lighting all around with twin LED headlamps with integrated DRLs, LED tail lights, indicators, and a number plate light
•advanced lightweight aluminum frame.
•Suspension – Showa’s monoshock RSU with a piggyback reservoir at the rear and a massive 47mm Showa USD front forks with compression and rebound damping.
•Stopping power comes from Brembo Stylema ® radial monobloc 4 – piston calipers with two 320 mm dual discs and a never-before-seen four 4-piston Brembo caliper with a single 300 mm disc.
•Tires & rims: 150/50 17-inch Avon Cobra Chrome tires with a blacked-out 20-spoke cast alloy wheel at the front and an incredible 240/60 section R16 tire with an intricate cast alloy wheel at the back.
•Track+ and Protect+ tracking and alarm systems

details:
Manufacturer: Triumph Motorcycles
Astronaut: Ron Betist
Photography: Nubbs Sugrue
Helmet: Davida HelmetsJacket & jeans: REV’IT Urban
Boots: Stylmartin

The post Lost in space – Triumph Rocket 3 R road tested appeared first on BikeBrewers.com.

We have seen some incredible builds the last 12 months, and we have to say that despite the world pandemic, we are very pleased to see that so many people still take time work on that what we love most: motorcycles. For 2021 we have created a TOP 5 of some of the most interesting, esthetically pleasing cafe racers we wrote about here on BikeBrewers. We looked at the number of views and shares on our website and social media channels, but also at originality. After all, the list is subjective.

So without further ado, and in complete random order, here are the BikeBrewers TOP 5 Cafe Racer builds of 2021

1. Moto Guzzi 1100 Cafe Racer by Robin Mehnert
When Robin Mehnert, the woodwind instrument maker from Germany, messaged us that he and his father had built a cafe racer based on a Moto Guzzi 1100 California, we got very excited. When you see the pictures of the Guzzi, it’s not hard to see why. Make sure to read the full article to find out more about this clean looking example of Italo-Germanic craftsmanship

2. Icon Motorcycle Triumph Bonneville Triton
Okay, so this Triumph Bonneville was actually built a couple of years ago. However, we only really heard of Icon Motorcycles last year. We didn’t know much about the outfit, and sadly their website has gone offline since. All we know is that the 2 Triumph Tritons they’ve build are unlike anything we have seen in a very long time. It’s almost like a spiritual experience. Luckily, we spent some time writing an article about the work of these fine people, that are based in the Netherlands.

3. Harley-Davidson LiveWire “Rule Breaker” by Moto Adonis
Moto Adonis has been working hard in 2021, with a number of unique projects and builds, we are impressed by the work the 2-man team from the Netherlands has been delivering. When they presented their Harley-Davidson LiveWire project our jaws literally dropped to the ground. This must be the most menacing looking electric motorcycle we have ever see. Period! It looks like a great white shark. In black. On 2 wheels. We dare anybody to show us a custom electric motorcycle that looks better than this.

4. Royal Enfield Continental GT 650 “Lilith” by XTRPepo
There is such a thing as a match made in heaven. In this case, it would be Pepo Rosell, founder and owner of XTRPepo, and Royal Enfield. Let us explain. Pepo has been building race bikes since before we could remember. He has been doing that passionately for the past 25 years. The last 6 years or so, he decided to take step back from building radical custom racing machines for high end customers, and to focus on the more “fun” side of business. Which brings us to Royal Enfield. The people’s champion as far as we’re concerned. Royal Enfield has rapidly gained popularity outside of its domestic market in India. No frills, simple, classy, and affordable. Heck, 2 of our editors bought a Royal Enfield 650 for personal use! That says something! Pepo built a period-correct racer around the Continental GT, and it looks the part.

5. Triumph Bonneville “Gotham” by Tamarit x MotoShare
Tamarit has been building bikes for a long time now, and this heavily modified Triumph Bonneville was their 81st build to be precise. The Alicante, Spain based builders were commissioned by MotoShare to build a cafe racer that provokes people. A bike that gets people talking. José Antonio of Tamarit says: “We took a 2007 Triumph Bonneville and turned it into this ominous looking machine. It was during a video call that one of the guys from MotoShare mentioned it looked like it was made for Batman. It was ‘The Gotham’ from there on.”

The post TOP 5 Cafe Racers 2021 by BikeBrewers appeared first on BikeBrewers.com.

Gotta catch them all!
‘Tis the season to be merry. It is nearly Christmas and Triumph Motorcycles have decided to convince us that we need to add another present to our wish list. To the very top of that list that is.
It was a present that has been long awaited and rumors have been abundant in the past months, with spy pictures of camouflaged bikes appearing left, right and center.

The adventure bike segment is probably taking the most rapidly increasing slice of the motorcycle cake. It seems the whole world is looking for both road and off road adventures on two wheels these days.

To provide for all those thrill seekers and those who just want to have a very cool bike to ride, a lot of manufacturers are actively trying to grow their adventure bike market share. At EICMA we even spotted Italian brands, famous for their race pedigree bikes, introducing motorcycles ready to take their riders to the most remote locations on our planet.
Triumph motorcycles have been in the adventure game for many years and are releasing no less than five different versions of the Tiger in 2022.

Lighter, stronger, better
According to the manufacturer the new models are ‘strikingly lighter and a lot more powerful, with class-leading handling and specs, plus the benefits of Triumph’s new T-plane triple – the all-new Tiger 1200 leaves little to the imagination: it’s built to be the most capable, agile and controllable, large displacement adventure engine on the planet.’

Continuing: ‘As said, those adventure bikes are a real treat under any circumstance. With a transformation in capabilities and performance on the tarmac, and the most dynamic and exhilarating off-road experience, the new generation brings together the best of all worlds in an all-new Tiger line-up.”

To make those aforementioned remote locations easier to reach there are now two all-new Tiger Explorer options with 30-liter tank, in theory capable of getting you no less than 600 Km in between fill-ups. All other models (the standard GT, GT Pro and the Rally Pro) only hold 20 liters.

Innovations
The new and exciting Explorer versions of the Tiger 1200 are also fitted out with an innovative blind spot detection system to warn the rider of vehicles that could be invisible in the rear-view mirrors.

In spite of the fact that Tigers are by nature solitary animals there now is a whole new group of them that belong together; The Tiger 1200 is aiming to gain traction in new fields with the addition of GT and Rally editions of the adventure bike. On top of that, the 2022 model will also be available in new Explorer versions, boasting long-range 30l fuel tanks mentioned earlier, plus higher-spec kits and added tech stuff.

In case you lost track; summing it all up there is a more track-oriented GT, and the more off-road-focused Rally. There is a Pro version available on both models. Then there is the Explorer version (with a suitcase set as the main extra). Last but not least Triumph also present a basic version of the GT, completing the group of five new Tigers set free in the wild.
 

Beefy engine
The Triumph Tiger 1200 is powered by a 150 hp variant of the three-cylinder from the new Speed Triple; with T-plane crankshaft with uneven ignition order. This will give the rider more torque at the bottom and more character overall.

The engineers found a way to add 9 BHp to the mix in comparison to the previous edition. However, the word is now out and Triumph is hunting for those GS fans, made very clear in a statement about the Tiger delivering 14 Bhp more than ‘that other big adventure with cardan in this class’ (..). Still there is a bit of work to be done in the torque department. With 130 Nm @ 7,000 rpm (8 Nm more than before), the Tiger still has less maximum torque than the BMW R 1250 GS, which boasts a 143 Nm.

But the fun is not over yet. Dieticians managed to trim an impressive 25kg off the Tiger. The lean machine now weighs a mere 240 kg (ready to drive), which is (here we go again) significantly lighter than the average weight of a GS.

This is in large part due to using an aluminum frame, which lessens to total weight with 5.4 kg. This includes the bolt-on aluminum subframe. The engineers decide to add a double swingarm. But even with adding extra steel, they managed to lower the weight of the total with another 1.5 kg.

Wheelies and stuff
The GT versions are fitted with 18-inch die-cast aluminum wheels, bot in front and rear. The Rally versions come with tubeless wire wheels (21 inches front, 18 inches rear). Showa is used for the springs, with 200 mm of travel on the GTs and 220 on the Rally version. These are semi-active ones on all versions. Stopping power is courtesy of Brembo with the Stylema monoblocs we also find on the Rocket. The ABS got an upgrade as well.

More technical stuff
Of course there are significant improvements in the cosmetic department. But there are a lot of technical improvements too:
• A double radiator (also found on the Tiger 900) making it easier to remove hot air from the engine
• Better ergonomics, very important for bikes in this segment
o both sitting and when riding while standing upright.
• Adjustable seat height (GT: 850-870 mm, Rally: 875-895 mm),
• A cockpit window which can be adjusted (while riding) with just one hand.
• Explorer versions standard fitted with blind spot radar,
• Heated grips and seats
• Tire pressure sensor.
• A new 7″ TFT display on all models including connectivity,
• Improved inclination-sensitive TC,
o (with six driving modes depending on the model
• New LED lighting on all sides with DRL and adaptive cornering lights
o Not on the base GT
• Updated quickshifter and Hill Hold
o Also not on the base GT

First reaction
Although we are fond of the Christmas season and riding a sleigh can at times be quite adventurous too, it will never be a substitute for the experience you will get on a purebred adventure bike.

The Triumph Tiger 1200 has been pretty decent from the start, but with all of the improvements it has become as strong a competitor for the world title as Max Verstappen is in Formula One. The BMW is the one to beat and the heat is on.

We hope BikeBrewers will be selected for the official press introduction in the beginning of next year. We really look forward to riding the machines as soon as they are available an will share a first hand report when we do.

For now, just continue to drool over the pictures and dream about your next adventure on two wheels.
If you want to do more than just wet your keypad check out a Triumph dealer near you.

We know for a fact that this particular Triumph dealer in the Netherlands will be happy to welcome you.

The post Release the Tigers! – 2022 Triumph Tiger 1200 appeared first on BikeBrewers.com.

Following last week’s announcement of the production of the millionth Triumph from Hinckley, the iconic British motorcycle brand also proudly presents the first ever Triumph prototype! To be touched only while wearing white gloves.

The prototype from 1901
This is truly nothing short of an amazing historical find. The prototype was discovered and restored by leading vintage Triumph collector Dick Shepherd. The 1901 prototype rewrites the history books and actually adds a whole new chapter to the period leading up to Triumph’s official sale, starting in 1902.

The rumors about the existence of this very first Triumph prototype were persistent, as it was referenced to in advertisements and reviews that appeared in 1901. The prototype was developed on the basis of a standard Triumph pedal bike, with a motor supplied by the Belgian manufacturer Minerva. The brand did this to arouse interest and at the same time to gauge among the public whether there would actually be a demand for a Triumph motorcycle.

Surreal discovery
Dick Shepherd says: “When I was approached by a friend of a collector, who unfortunately had recently passed away, to appraise an old Triumph, I was exuberant. Especially when I found out that this bike possessed unique details that I had never seen on any of the the first production Triumphs. Along with the engine, the collector had also received a letter from Triumph, dated 1937, describing the unique origin of the motorcycle and providing important details.”

Continuing: “With an engine number consistent with references in Minerva’s engine data from a first agreement with Triumph in 1901, the historical importance of this motorcycle became immediately apparent.”

“As a lifelong fan of the history and successes of this incredible British brand, it gives me immense satisfaction to have had the honor to ‘unearth’ this amazing survivor. Added to that feeling is the fact it is incredible to have been allowed to restore it to the glorious state in which it would have been, when it was first exhibited in 1901.”

Unveiling
The 1901 prototype, which was first unveiled at the Motorcycle Live show in the UK, will be on display at a special event at Triumph’s Factory Visitor Experience on December 14th. For this special occasion, the machine will be ridden in public for the first time in more than 100 years.

This important historic bike will be on display together with the millionth Hinckley Triumph in a new showcase specially made for the 120th anniversary in Triumph’s visitor centre.

The Triumph Factory Visitor Experience is free to visit and is located at Triumph’s headquarters in Hinckley, England. It is open daily from Wednesday to Sunday, from 10:00 to 16:30.

The BikeBrewers team were invited for the opening back in 2017 and have been back a few times since then.
When visiting Birmingham on a road trip, make sure to add it to your stops. It is definitely worth spending some time in.

The post Rewriting history – the lost 1901 Triumph Prototype appeared first on BikeBrewers.com.

ONE MILLIONTH ‘HINCKLEY PRODUCED’ TRIUMPH KICKS OF THE ICONIC BRITISH BRAND’S 120-YEAR ANNIVERSARY PLANS

Hand in hand with the announcement of plans to celebrate next year’s 120th anniversary of the most iconic British motorcycle brand in the world, Triumph unveils the landmark millionth (!) Hinckley Triumph produced.

Just in case you wonder why the particular mentioning of Hinkley;
The original factory, Triumph Engineering Co Ltd was a British motorcycle manufacturing company, based originally in Coventry and then in Meriden. In the 1980’s of the last century the company went bankrupt largely due to the heavy competition of the Japanese manufacturers. Just like most other iconic British motorcycle brands.

The current company, Triumph Motorcycles Ltd, is now based in Hinckley. It gained the name rights after the end of the company in the 1980s and is currently one of the world’s major motorcycle manufacturers.

The Millionth Triumph of The Modern Era
Triumph has reached a historic milestone in its modern era with the reveal of the millionth motorcycle built since the brand’s return in 1990. Unveiled at Triumph’s Global Headquarters in Hinckley on December 1st 2021 by Nick Bloor, CEO, in front of the UK team, the millionth Triumph is a one-off custom painted model of Triumph’s incredibly successful Tiger 900 Rally Pro.
Launched in 2019 the Tiger 900 Rally Pro provides a perfect demonstration of Triumph’s world leading design, engineering and production capability, courtesy of its class defining character, capability, quality and attention to detail – attributes shared by all of Triumph’s modern line-up

With its sophisticated custom Silver paint scheme and one millionth graphics this very special milestone motorcycle will be displayed on Triumph’s stand at this year’s Motorcycle Live show at the NEC and then on show in Triumph’s Factory Visitor Experience.

Says Bloor: ‘’Everyone at Triumph is incredibly proud to have played a part in achieving such a momentous moment in the modern history of this iconic brand. Over the 31 years since we re-launched Triumph with a new line of British designed motorcycles in Cologne in 1990, we have shared so many great moments with our fans across the world. Triumph’s success has always stemmed from the passion and commitment we share with our riders.’’

‘’Whilst the last year has been challenging for all of us, this passion and commitment has driven Triumph to even greater heights, including the successful entry into new categories with the Trident 660 and Tiger Sport 660.”

“Over the last three decades Triumph has maintained sustained and significant investment in our people, our partners and our in-house design, engineering and manufacturing capabilities, in order to grow the reach and reputation of this iconic British brand. This investment in home grown talent, both in the UK and around the world, matched by the passion we share with our riders for delivering the complete and perfect motorcycle, has seen the brand go from strength to strength, achieving the most successful year in the brand’s entire 120-year history.’’

‘’Furthermore, we are committed to taking the brand to even greater heights, and with the forthcoming launch of our brand new Tiger 1200, new competition MX and Enduro motorcycles, plus our strategic partnership with Bajaj to create smaller capacity bikes, I am delighted to say that the future for Triumph and its fans across the world will be just as exciting and rich as the last 30 years has been.’’

Celebrating 120 Years of the Most Successful British Motorcycle Brand
Encompassing millions of passionate fans who share the same obsession for motorcycling Triumph announce their plans to celebrate in 2022 the landmark 120-year anniversary of this iconic British motorcycle brand.

The very first production Triumph motorcycle went on sale to the public in April 1902, starting one of the world’s richest and most exciting brand stories; a story that has gone on to encompass countless legendary motorcycles, and playing a significant role in shaping the motorcycle world we enjoy today.

Triumph’s modern era began in 1990 with a completely original range of motorcycles designed and built in a brand new, state-of-the-art factory at Hinckley. In the three decades since, Triumph has built and sold more motorcycles than at any previous time in its history through an international network of more than 700 dealers in 57 countries.

And despite recent challenges, the passion for Triumph shared around the world by owners, riders, fans and dealers has made the last 12 months the most successful ever, with more than 75,000 bikes registered globally and a turnover of £650 million.
Triumph represents the very pinnacle of Great British design and engineering, with a line-up of world-beating bikes spanning multiple genres from adventure to roadsters to modern classics, each delivering Triumph’s renowned reputation for class-leading handling, finish and detailing and original, authentic design.

Today Triumph operates across five manufacturing facilities, all managed and led by the global headquarters in Hinckley, Leicestershire, where every Triumph is conceived, prototyped and tested in Triumph’s centre of design excellence by our in-house team. The most recent addition to Hinckley’s impressive infrastructure is an all-new UK assembly plant, built to enhance Triumph’s global manufacturing flexibility and complement the existing multi-million-pound paint shop and rapid prototyping facilities.

The post ONE MILLIONTH HINCKLEY TRIUMPH appeared first on BikeBrewers.com.

This time Grzegorz Korczak, the man behind Unikat, got his hands on a 2021 Triumph Bonneville Bobber. I know, I know, this looks like a different kind of bobber. Truth be told, there are different definitions of what makes a bobber, a bobber. There are European and American style bobber, there are also Japanese style bobbers. Regardless of the different styling exercises, one thing that they all have in common is the fact that they appear to be minimalistic. In a way, you could look at this like this: what a café racer is to a road bike, a bobber is to a cruiser. Same rules apply: get rid of all unnecessary parts to reduce the weight, and make the bike look as simple as possible.

Coming back to Unikat’s Triumph Bonneville Bobber, which has been name “K18”, we see that a number of stylish mods have been made to the original. No doubt did the original Bobber look great, but what Unikat did here takes the stock bike to a whole other level.

The original bobber wheels have been replaced with a pair of lightweight, black Takasago Excel 17” rims with stainless steel spokes. What’s interesting about the wheels is that they have adopted the BARTubeless system; transforming them into tubeless wheels. The rims have been wrapped by a pair of sticky Pirelli Dunlop Mutant tires.

The rear fender had been completely removed, while the front fender got a nice trim job and received a distinguished Unikat 1-of1 logo, kind of like an easter-egg, waiting to be discovered. Staying at the front, we can also see that the speedo and the headlamp have both been lowered for a sportier stance. There’s a set of Motogadget bar-end indicators, which have been combined with a set of bar-end mirrors. The handlebar grips have received a nice leather wrap treatment. Womet Tech supplied the sporty clutch and brake levers. A pair of fork gaiters keep the front fork clean and mean.

Moving a bit more backwards to the fuel tank, we spot a beautifully milled, gold anodized fuel filler cap. Underneath the fuel tank, the original factory airbox has been removed and a pair of free flow air filet, curtousy of K&N have been placed to take care of the breathing. The ‘faux-carburetor’ injection covers have been treated to the 1-of-1 logo treatment too. Underneath the engine, a stainless-steel exhaust system, in combination with Unikat’s very own in-house built exhaust pipes, ensure that the combustion gases leave the engine in an effective and dramatic manner.

A lot of work has been put in cleaning up this bike by hiding as much of the wiring as possible. Part of that is the Hi-sider 3-in-1 taillight, that have built in indicators and license plate holder, and is in fact completely road-legal. The special thing about is, is that it is integrated into the single-seat. The finish of this Triumph in a gorgeous dark green color in combination with glossy black, with all the little gold-colored details really distinguishes this build from any other Bobber we have seen so far.

Builder details:
UNIKAT Motorworks
Website
Instagram
Facebook
YouTube

The post Triumph Bonneville 1200 Bobber “K18” by UNIKAT appeared first on BikeBrewers.com.