sl125_1

Last week I’ve interviewed James Fawcett about this cool Honda 125 Scrambler mashup:

Why did you build this bike?

Last year I built a CB200t with my then 17-year-old son. This year, my 13-year-old decided he wanted in on the fun. After tinkering with his old XR80, his ideas started getting a lot bigger.
Why did you pick this base bike and where does it come from? This bike really did come from the scrap pile. We found all of the major components stuffed in boxes in storage.

What was your idea or vision?

The vision for this bike was just to make a simple, versatile bike that’s super fun to blast around on.

Where did you find inspiration for the project?

We’re keen to vintage bikes and the styling that came out of the early ‘70s. We wanted to incorporate some of the features of slightly more modern dirt bikes and scramblers but still keep some real vintage styling. One of the keys for us is well-considered lines and angles – it needed to look coherent and thoughtful, not like a bunch of mismatched parts that were bolted together.

What was the total budget?

The budget for this build was pretty low, as we had most of these old parts laying around. Probably the single largest parts purchase was a full set of custom stainless spokes and nipples from Buchannans. The real investment was in time.

sl125_3sl125_2

Any interesting challenges?

Ha! Everything about this build was a challenge. There’s an absurd amount of custom fabrication that went into this little 125cc bike – the frame, the suspension, the swingarm, the tank, fenders. Virtually nothing on this bike was an off-the-shelf OEM or aftermarket product. Interestingly, if I had to pick the single most challenging aspect, it would be the graphics on the tank. The design was masked freehand, and some of the corners are on a pretty tight radius. Once we got through the agony of taping the first side just right, we had to replicate it on the other side. Then multiply that times three to give it that tri-tone paint scheme.

Did you got help from others or did you outsource any work?

Nothing on this bike build was outsourced. All of the custom fabrication, engine work, wheel building, paint, and graphics were done by me and my son, Eddy. Even the custom seat was shaped and sewn in-house by me.

sl125_6 sl125_8 sl125_9

What modifications are made and what parts are used?

It’s hard to list what’s been modified. This bike is truly a one-of-a-kind custom build that borrows components and features from a whole host of old small displacement Hondas — CB125s, CL125, XR100, SL125.

What do you like the most?

There’s not a single feature that I like the most. I’m really happy with the paint and graphics, and I love the custom carbon fiber rear fender. The brake lights integrated into the subframe are a nice touch. Those features are all cool on their own, but it’s the overall fit and finish of the final product that I’m most happy with – the way all of the technical and design decisions come together in a cohesive way that gives the bike a well-thought-out, balanced, and tidy feel.

And last but not least: how does it ride?

This thing is a blast! Everybody seems to want more CC’s and more power, but there’s something awesome about a small displacement bike where you can crank the throttle all the way open and let ‘er rip!

List of mods:

  • Modified tank and front fender from a Honda SL125
  • Modified monoshock frame, with custom subframe and extended swingarm
  • Custom fabricated electronics tray mounted under seat
  • Custom fabricated seat pan and custom seat cover
  • Hand-made carbon fiber rear fender
  • Custom skid plate and front light plate
  • CL125 scrambler exhaust with stainless steel cone muffler
  • 18” wheels with stainless steel spokes and dual sport tires
  • 12v conversion with LED lighting and custom handlebar switch housings
  • LED brake lights integrated into subframe tubing
  • New piston and cylinder along with a top-end refresh
  • Mikuni carburetor
  • Custom designed and painted tank graphics
  • All of the little, big details

sl125_field_1

 

By Published On: July 9, 2018Categories: Cafe Racer2 Comments on Honda 125 Scrambler Mashup3.9 min readViews: 873

Share This Story, Choose Your Platform!

About the Author: Ron Betist

Ron Betist grew up with motorcycles with a father heading the Amsterdam motorcycle police force. He has been riding (legally) for over 40 years and motorcycles are his true passion. With a life-long career in marketing and sales he has a huge international network. He joined as a contributor at BikeBrewers in 2017 to spread his word about bikes with the rest of the world.

2 Comments

  1. Adalbert January 18, 2020 at 6:48 pm - Reply

    Super Motocykl, super sylwetka, podoba się mi to dzieło jako konstrukcja.
    Pozdrawiam serdecznie Projektanta motocykla i Konstruktora technicznego.
    Adalbert, Polska

    • Ron Betist January 21, 2020 at 2:02 pm - Reply

      Thanks for the positive feedback!

Leave A Comment

Tags

 

sl125_1

Last week I’ve interviewed James Fawcett about this cool Honda 125 Scrambler mashup:

Why did you build this bike?

Last year I built a CB200t with my then 17-year-old son. This year, my 13-year-old decided he wanted in on the fun. After tinkering with his old XR80, his ideas started getting a lot bigger.
Why did you pick this base bike and where does it come from? This bike really did come from the scrap pile. We found all of the major components stuffed in boxes in storage.

What was your idea or vision?

The vision for this bike was just to make a simple, versatile bike that’s super fun to blast around on.

Where did you find inspiration for the project?

We’re keen to vintage bikes and the styling that came out of the early ‘70s. We wanted to incorporate some of the features of slightly more modern dirt bikes and scramblers but still keep some real vintage styling. One of the keys for us is well-considered lines and angles – it needed to look coherent and thoughtful, not like a bunch of mismatched parts that were bolted together.

What was the total budget?

The budget for this build was pretty low, as we had most of these old parts laying around. Probably the single largest parts purchase was a full set of custom stainless spokes and nipples from Buchannans. The real investment was in time.

sl125_3sl125_2

Any interesting challenges?

Ha! Everything about this build was a challenge. There’s an absurd amount of custom fabrication that went into this little 125cc bike – the frame, the suspension, the swingarm, the tank, fenders. Virtually nothing on this bike was an off-the-shelf OEM or aftermarket product. Interestingly, if I had to pick the single most challenging aspect, it would be the graphics on the tank. The design was masked freehand, and some of the corners are on a pretty tight radius. Once we got through the agony of taping the first side just right, we had to replicate it on the other side. Then multiply that times three to give it that tri-tone paint scheme.

Did you got help from others or did you outsource any work?

Nothing on this bike build was outsourced. All of the custom fabrication, engine work, wheel building, paint, and graphics were done by me and my son, Eddy. Even the custom seat was shaped and sewn in-house by me.

sl125_6 sl125_8 sl125_9

What modifications are made and what parts are used?

It’s hard to list what’s been modified. This bike is truly a one-of-a-kind custom build that borrows components and features from a whole host of old small displacement Hondas — CB125s, CL125, XR100, SL125.

What do you like the most?

There’s not a single feature that I like the most. I’m really happy with the paint and graphics, and I love the custom carbon fiber rear fender. The brake lights integrated into the subframe are a nice touch. Those features are all cool on their own, but it’s the overall fit and finish of the final product that I’m most happy with – the way all of the technical and design decisions come together in a cohesive way that gives the bike a well-thought-out, balanced, and tidy feel.

And last but not least: how does it ride?

This thing is a blast! Everybody seems to want more CC’s and more power, but there’s something awesome about a small displacement bike where you can crank the throttle all the way open and let ‘er rip!

List of mods:

  • Modified tank and front fender from a Honda SL125
  • Modified monoshock frame, with custom subframe and extended swingarm
  • Custom fabricated electronics tray mounted under seat
  • Custom fabricated seat pan and custom seat cover
  • Hand-made carbon fiber rear fender
  • Custom skid plate and front light plate
  • CL125 scrambler exhaust with stainless steel cone muffler
  • 18” wheels with stainless steel spokes and dual sport tires
  • 12v conversion with LED lighting and custom handlebar switch housings
  • LED brake lights integrated into subframe tubing
  • New piston and cylinder along with a top-end refresh
  • Mikuni carburetor
  • Custom designed and painted tank graphics
  • All of the little, big details

sl125_field_1

 

By Published On: July 9, 2018Categories: Cafe Racer2 Comments on Honda 125 Scrambler Mashup3.9 min readViews: 873

Share This Story, Choose Your Platform!

About the Author: Ron Betist

Ron Betist grew up with motorcycles with a father heading the Amsterdam motorcycle police force. He has been riding (legally) for over 40 years and motorcycles are his true passion. With a life-long career in marketing and sales he has a huge international network. He joined as a contributor at BikeBrewers in 2017 to spread his word about bikes with the rest of the world.

2 Comments

  1. Adalbert January 18, 2020 at 6:48 pm - Reply

    Super Motocykl, super sylwetka, podoba się mi to dzieło jako konstrukcja.
    Pozdrawiam serdecznie Projektanta motocykla i Konstruktora technicznego.
    Adalbert, Polska

    • Ron Betist January 21, 2020 at 2:02 pm - Reply

      Thanks for the positive feedback!

Leave A Comment

Tags